CX15G251
COAXIAL
The CX15G251 is a lightweight coaxial driver with excellent linearity and high efficiency.
The CX15G251 radiates a coherent single spherical wave front with perfect dispersion control.
The design is powered from a large sized single ceramic ring magnet that provides an extremely high flux density and BL factor.
The new hyper-vented aluminium basket and magnetic assembly design provide an excellent heat dissipation and lower power compression. Special air-forced ventilations are provided for voice coil, magnet assembly and basket.
A 2,5” voice coil combined a strength fibreglass former and aluminium wire drives the mid-bass cone with high efficiency and a good extension.
The 1,7” dome compression driver, loaded to a 60° conical waveguide, provides a clear vocal output and a perfect high frequency extension.
- • The CX15G251 is the perfect lightweight solution for vocal applications, stage monitoring and compact 2-way reflex enclosures.
- • Ideal in designs where a constant radial directivity pattern is a requirement is designed for use in compact reflex enclosures and stage monitor.
- • 11100099
- 600 Watt continuous program power handling Mid-Bass
- 2.5-inch , fibreglass outside aluminum voice coil
- 100 dB Sensitivity
- 50 Hz - 3.5 kHz Frequency range
- Dual-forced air ventilation for minimum power compression
- Triple-roll surround and exponential cone geometry
- 100 Watt Continuous program power handling HF
- 1.75-inch Diaphragm, 1.0-inch Exit Throat
- Frequency range: 1200Hz – 20kHz
- 2-slot, optimised geometry phase plug
- Kapton diaphragm
- Aluminum rear cover
- Nominal Diameter: 25.4 / 1.0 mm/inch
- Rated Impedance: 8 Ω
- Program Power: 100 W
- Power Handling Capacity: 50 W
- Sensitivity 1 W, 1 m: 105 dB
- Frequency Range: 1200 - 20000 Hz
- Minimun Impedance: 6.5 Ω
- Voice Coil Diameter: 44.4 / 1.75 mm/inch
- Voice Coil Material: Edgewound Aluminum
- Number of layers: 1 - Outside
- Diaphragm Material: Kapton
- Diaphragm Design: Dome
- Suspension Material: Kapton
- Suspension design: Flat
- BL factor: 7.5 T · m
- Flux density: 1.6 T
- Phase plug design: 2 slot
- Phase plug material: Composite
- Magentics: Ferrite
- Throat Diameter: 25.4 / 1.0
- Nominal coverage (-6dB): 60°°
- Cut-off Frequency: 1800
- Material: Structural Polyurethane
- Nominal Diameter: 380 / 15 mm/inch
- Rated Impedance: 8 Ω
- Program Power: 600 W
- Power Handling Capacity: 300 W
- Sensitivity: 100 dB
- Frequency Range: 50 - 3500 Hz
- Effective Piston Diameter: 330 / 13 mm/inch
- Max Excursion Before Damage (peak to peak): 30 / 1.18 mm/inch
- Minimun Impedance: 6.4 Ω
- Voice Coil Diameter: 64 / 2.52 mm/inch
- Voice Coil Material: Aluminum
- Voice Coil Winding Depth: 14 / 0.55 mm/inch
- Number of layers: 1
- Kind of layer: outside
- Top Plate Thickness: 8 / 0.31 mm/inch
- Cone Material: No pressed pulp
- Cone Design: Curved
- Surround Material: Polycotton
- Surround Design: Triple - roll
- Resonance frequency: Fs - 41 Hz
- DC resistance: Re - 5.2 Ω
- Mechanical Factor: Qms - 7.6
- Electircal Factor: Qes - 0.41
- Total Factor: Qts - 0.39
- BL Factor: Bl - 14.9 T · m
- Effective Moving Mass: Mms - 70 g
- Equivalent Cas air load: Vas - 219 liters
- Effective piston area: Sd - 0.086 m²
- Max. linear excursion ( mathematical): Xmax - 4.8 mm
- Voice - coil inductance @ 1 kHz: Le1K - 0.5 mH
- Half-space efficiency: Eff - 3.5%
- Overall Diameter: 388 / 15.3 mm/inch
- Bolt Circle Diameter: 369 - 373 / 14.5 - 14.7 mm/inch
- Bolt Hole Diameter: 5.5 / 0.21 mm/inch
- Front Mount Baffle Cut-out: 355 / 13.98 mm/inch
- Rear Mount Baffle Cut-out: 358 / 14.09 mm/inch
- Depth: 161 / 6.34 mm/inch
- Volume occupied by the driver: 3.5 / 0.12 liters/ft³
- Net Weight: 7.0 / 15.43 kg/lbs
- Shipping Weight: 7.3 / 16.09 kg/lbs