CX15N351
COAXIAL
  • 3.5 - inch Inside / Outside copper voice coli
  • 900 Watt continuous program power LF
  • 101 dB Sensitivity
  • 40 Hz - 3 kHz Frequency range
  • 3.5 - inch Inside / Outside copper voice coli
  • 900 Watt continuous program power LF
  • 101 dB Sensitivity
  • 40 Hz - 3 kHz Frequency range
  • Dual - forced air ventilation for minimum power compression
  • Dual spider design with silicon based damping control
  • 2.5 - inc Diaphragm, 1.4 - inch Exit Throat / Pure Titanium Compression Driver
  • 180 Wat Continuos program power HF
  • Frequency range: 700 Hz - 20 kHz
  • Direct Drive Voice Coil Assembly
This CX15N351 is designed to provide an excellent frequency response linearity with very low distortion. This coaxial use a strongest unique neodymium magnetic structure that guarantee high dynamic and sensitivity for both components. The mid-bass section use a 3,5” voice coil design provides a very high power handling, especially recommended in comparison to a standard 3" voice coil, demodulation ring get a fastest time response and lower distortion . The compression driver use a 2.5-inch diaphragm with a 1.4 inch throat featuring several state of the art technologies. The diaphragm and suspension are formed from 0.05mm thick pure titanium. The unique magnetic structure allow to get a single point source that providing coherent wave front.

Part Number:

  • 11100032
    CX15N351
    8ohm
Specifications
General specifications
Nominal Diameter:
15 inch / 381 mm
Related Impedance (Ohm):
8.00 ohm
Program Power (Watt):
900 W
Power handling capacity (Watt):
450 W
Sensitivity (dB):
101.0 dB
Frequency range:
40 - 3000 Hz
Effective piston diameter:
330 mm / 12.99 inch
Max. Excursion Before Damage:
39 mm / 1.54 inch
Minimim Impedance (Ohm):
6.8 ohm
Voice Coil Diameter:
3.5 inch / 89 mm
Voice Coil Material:
Copper
Voice Coil Winding Depth:
0.67 inch / 17 mm
Kind of layers:
inside/outside
Top Plate Thickness:
11 mm / 0.43 inch
Cone Design:
Curved
Surround Material:
Polycotton
Surround Design:
M-roll
Magnets:
Neodymium
Dual-force air ventilation:
Yes
Demodulation Rings material:
Aluminium
Spider:
Dual with silicon based damping control
Thiele - small parameters
Resonance frequency (Fs) (Hz):
55 Hz
DC resistance (Re) (Ohm):
5.60 ohm
Mechanical factor (Qms):
6.00 Qms
Electrical factor (Qes):
0.27 Qes
Total factor (Qts):
0.26 Qts
BL factor (BL) (T x m):
23.50 T x m
Effective moving mass (Mms) (gr):
80.0 g
Equivalent Cas air loaded (Vas) (liters):
110.0 liters
Effettive piston area (Sd) (m2):
0.090 m2
Max. linear excursion (Xmax) (mm):
6.0 mm
Voice coil inductance @ 1kHz (Le1k) (mH):
1.65 mH
Half-space efficency (Eff) (%):
6.53%
General specifications driver
Diaphragm Material:
Pure Titanium
Exit Throat Diameter:
1.4 inch / 36 mm
Flux Density (T):
2.0 T
Frequency range:
700 - 20000 Hz
Kind of layers:
outside
Magnetics:
Neodymium
Minimim Impedance (Ohm):
7.90 ohm
Number of layers:
1.00
Phase Plug Design:
3 slot
Phase Plug Material:
Aluminium
Power handling capacity (Watt):
90 W
Program Power (Watt):
180 W
Related Impedance (Ohm):
8.00 ohm
Sensitivity (dB):
110 dB
Suspension Design:
Progressive
Suspension Material:
Pure Titanium
Voice Coil Demodulation Ring:
Copper
Voice Coil Diameter:
2.5 inch / 63 mm
Voice Coil Material:
Edgewound Aluminium
General specifications horn
Throat Diameter:
36 mm / 1.4 inch
Horizontal coverage angle (°):
60°
Vertical coverage angle (°):
60°
Cut-off Frequency (Hz):
800 Hz
Material:
Structural Polyurethane
Mounting Information
Overall diameter:
393 mm / 15.47 inches
Bolt circle diameter:
371-376 mm / 14.61-14.8 inch
Bolt hole diameter:
7 mm / 0.28 inch
Front mount baffle cut-out:
354 mm / 13.94 inch
Rear mount baffle cut-out:
354 mm / 13.94 inch
Volume occupied by the driver:
3.8 liters / 0.15 ft3
Standard compliance
CE marking:
Yes
Size
Diameter:
393 mm / 15.47 inches
Height:
254 mm / 10 inches
Weight:
7 kg / 15.43 lbs
Shipping informations
Package Depth:
440 mm / 17.32 inches
Package Height:
240 mm / 9.45 inches
Package Weight:
8.5 kg / 18.74 lbs
Package Width:
440 mm / 17.32 inches
.