TTS 56-A
ACTIVE HIGH POWER SUBWOOFER
  • 2 x 3400 W digital amplifiers
  • 2 x 21" high power neodymium woofers
  • 96 kHz, 32 bit DSP processing
  • RDNet on board
  • 2 x 3400 W digital amplifiers
  • 2 x 21" high power neodymium woofers
  • 96 kHz, 32 bit DSP processing
  • Remote monitoring and control
  • Time delay alignment
  • Cardioid preset for groups
  • Tour grade cabinet
  • RDNet on board
  • Maximum output per size on market
The TTS56-A is a high power, high output active subwoofer system that sets a new standard in the touring sound reinforcement.
The new 21" neodymium design represents the result of many years dedicated in pioneering new solutions for the transducers technology. The integration of the 6800 W, two channel digital amplification and the advanced digital processing set a new standard for distortion, noise and thermal efficiency.

Part Number:

  • 13000190
    TTS 56-A
    90-240V
    EAN 8024530008611

RCF RDNet

MONITORING AND MANAGEMENT NETWORK
The new RDNet release features extensive improvements. The audio system is now configurable in Groups of speakers or in the new Array clusters, the Air Compensation and the Cluster Size shaping are more precise and controllable, as well as the FiRPHASE gain. The subwoofer configuration is faster, even for complex EndFire set-ups.

Read More

ACTIVE ADVANTAGE

An active sound system means having the power amplifier on-board of the cabinet. This brings some advantages:

  • Reduced setup time
  • Daisy chain signal and power connection of the entire system or by groups
  • No additional amplifier rack(s), saving space in the truck
  • The sound quality and performance are optimized to the individual components inside the speaker
  • The RDNet Networked Control can monitor each component of the system
  •  

    Read more about TT+

    TOP END ELECTRONICS

    The amplifier integrates a low-noise 32 bit DSP circuit, controlled through the RCF exclusive RDNet network to easily handle the soft clipping limiters, RMS limits, polarity, amplitude, timing and equalisation. All the settings, monitoring and advanced features are available inside the RDNet Networked Management software. The available control panel on the back adjusts input sensitivity, Low Cut, Xover, volume, bypass, delay and presets.

    HIGH PERFORMANCE HYPERVENTED WOOFER

    RCF manufactures these components to deliver the cleanest, punchiest, and undistorted low frequencies reproduction. The cone is composed of 30% carbon fibre, 20% fibreglass and 50% cellulose pulp. This particular chemical composition has been carefully developed to improve the robustness and rigidness of the cone avoiding any deformation that would result in a loss of efficiency. RCF engineers have developed a unique internal ventilation system with very low power compression. The cone is water resistant.

     

    Read More

    CABINET

    The RCF TT+ cabinets are made of high-quality birch plywood with weatherproof treatments, 4 reinforced rubber feets, nylon side protection accessories and 6 handles. The back of the cabinet is provided with two steel bars for fork-lift transportation that preserves the cabinet from being scratched. The subs are stackable and light-weight, for easy set-up and tear down. The polyurea coating and the rugged structure of the cabinet survive long-term use and transportation and the separate Vibrostop housing for the amplifier guarantee the best components efficiency and reliability. The transportation is fast with the detachable Kart kit: a dolly caster-board with rugged tour grade casters and rotating cam mechanism.

    CLASSIC BASS REFLEX PORT
    The flow becomes turbulent
    and the vortices are evident

    LAMINAR FLOW VENTED PORT
    Good aerodynamic behaviour of the air (laminar),
    gaining efficiency and reducing distortions

     

     

    THE GOOD FLOW

    It’s common knowledge in fluid dynamics that the turbulent airflow is reduced with a smart design of the port.

    The improved vented port is a proprietary solution that helps to achieve a good aerodynamic behaviour of the air (laminar), gaining efficiency and reducing distortion.

     

     

     

     

    Specifications
    Acoustical specifications
    Frequency Response:
    30 Hz ÷ 100 Hz
    Max SPL @ 1m:
    145 dB
    Transducers
    Woofer:
    2 x 21'' neo, 4.5'' v.c
    Input/Output section
    Input signal:
    bal/unbal
    Input connectors:
    XLR, RDNet Ethercon
    Output connectors:
    XLR, RDNet Ethercon
    Input sensitivity:
    -2 dBu/+10 dBu
    Processor section
    Hi-Pass Frequencies:
    90 Hz
    Low-Pass Frequencies:
    60 Hz
    Protections:
    Thermal, Excurs., RMS
    Limiter:
    Soft Limiter
    Controls:
    DSP Controlled
    RDNet:
    Yes
    Power section
    Total Power:
    13600 W Peak, 6800 W RMS
    Low frequencies:
    13600 W Peak, 6800 W RMS
    Cooling:
    Convection/Forced
    Connections:
    Powercon IN/OUT
    Standard compliance
    CE marking:
    Yes
    Physical specifications
    Cabinet/Case Material:
    Baltic birch plywood
    Hardware:
    2 x steel bar fork - lift transportation, 4 x 100 mm wheels
    Handles:
    6 side
    Grille:
    Steel
    Color:
    Black
    Size
    Height:
    590 mm / 23.23 inches
    Width:
    1170 mm / 46.06 inches
    Depth:
    988 mm / 38.9 inches
    Weight:
    122.8 kg / 270.73 lbs
    Shipping informations
    Package Height:
    1316 mm / 51.81 inches
    Package Width:
    800 mm / 31.5 inches
    Package Depth:
    1200 mm / 47.24 inches
    Package Weight:
    178.2 kg / 392.86 lbs
    Videos
    RDNet 3.0 tutorial part 1
    RDNet is a secure and robust management for small, medium, and arena-sized sound systems as well as complex and extended installations. Based on a proprietary network protocol RDNet provides straightforward monitoring and intuitive control of the RCF audio system down to every connected device/object.
    RDNet 3.0 tutorial part 2
    RDNet is a secure and robust management for small, medium, and arena-sized sound systems as well as complex and extended installations. Based on a proprietary network protocol RDNet provides straightforward monitoring and intuitive control of the RCF audio system down to every connected device/object.
    RDNet 3.0 tutorial part 3
    RDNet is a secure and robust management for small, medium, and arena-sized sound systems as well as complex and extended installations. Based on a proprietary network protocol RDNet provides straightforward monitoring and intuitive control of the RCF audio system down to every connected device/object.
    RDNet 3.0 tutorial part 4
    RDNet is a secure and robust management for small, medium, and arena-sized sound systems as well as complex and extended installations. Based on a proprietary network protocol RDNet provides straightforward monitoring and intuitive control of the RCF audio system down to every connected device/object.
    RDNet 3.0 tutorial part 5
    RDNet is a secure and robust management for small, medium, and arena-sized sound systems as well as complex and extended installations. Based on a proprietary network protocol RDNet provides straightforward monitoring and intuitive control of the RCF audio system down to every connected device/object.
    Time Lapse Ligabue Firenze
    .