Features
  • 600 Watt continuous program power handling Mid-Bass
  • 2.5-inch , fibreglass outside aluminum voice coil
  • 101 dB Sensitivity
  • 50 Hz - 3.0 kHz Frequency range
  • Dual-forced air ventilation for minimum power compression
  • Triple-roll surround and exponential cone geometry
  • Demodulation ring
  • 100 Watt Continuous program power handling HF
  • 1.75-inch Diaphragm, 1.0-inch Exit Throat
  • Frequency range: 1200Hz – 20kHz

The CX15N251 is a lightweight coaxial driver with excellent linearity and high efficiency. The CX15N251 radiates a coherent single spherical wave front with perfect dispersion control. The design is powered from a large sized single neodymium ring magnet that provides an extremely high flux density and BL factor. The new hyper-vented aluminium basket and magnetic assembly design provide an excellent heat dissipation and lower power compression. Special air-forced ventilations are provided for voice coil, magnet assembly and basket. A 2,5” voice coil combined a strength fibreglass former and aluminium wire drives the mid-bass cone with high efficiency and a good extension. The 1,7” dome compression driver, loaded to a 60° conical waveguide, provides a clear vocal output and a perfect high frequency extension.

Part number:

11100070
CX15N251
8ohm

Specifications
General specifications
Nominal Diameter
15 inch / 381 mm
Related Impedance
8.00 ohm
Program Power (watt)
600 W
Power handling capacity
300 W
Sensitivity
101.0 dB
Frequency range
50 - 3000 Hz
Effective piston diameter
330 mm / 12.99 inch
Max. Excursion Before Damage
30 mm / 1.18 inch
Minimum Impedance (ohm)
6.4 ohm
Voice Coil Diameter
2.5 inch / 63 mm
Voice Coil Length
0.55 inch / 14 mm
Number of layers
1
Kind of layers
outside
Top Plate Thickness
8 mm / 0.31 inch
Cone Design
Curved
Surround Design
Triple roll
Dual-force air ventilation
Yes
Thiele - small parameters
Resonance frequency (Fs)
55 Hz
DC resistance (Re) (ohm)
5.20 ohm
Mechanical factor
8.00 Qms
Electrical factor
0.37 Qes
Total factor
0.35 Qts
Bl factor (Bl) (T x m)
18.10 T x m
Effective moving mass (Mms)
71.0 g
Equivalent Cas air loaded (Vas)
136.0 liters
Effective piston area (Sd)
0.090 m2
Max. linear excursion (Xmax)
5 mm
Voice coil inductance @ 1kHz (Le1k)
1.20 mH
Half-space efficency (Eff)
5.00%
General specifications driver
Exit Throat Diameter
1.0 inch / 25 mm
Related Impedance
8.00 ohm
Program Power (watt)
100 W
Power handling capacity (watt)
50 W
Sensitivity
109 dB
Frequency range driver
1200 - 20000 Hz
Suspension Design
Flat
Minimum Impedance (ohm)
6.50 ohm
Voice Coil Diameter driver
1.75 inch / 44 mm
Number of layers
1.00
Kind of layers
outside
Flux Density
1.9 T
Phase Plug Design
2 slot
General specifications horn
Throat Diameter
25 mm / 1 inch
Horizontal coverage angle
60°
Vertical coverage angle
60°
Cut-off Frequency
1800 Hz
Mounting information
Overall diameter
388 mm / 15.28 inches
Bolt circle diameter
369-373 mm / 14.53-14.69 inch
Bolt hole diameter
6 mm / 0.24 inch
Front mount baffle cut-out
357 mm / 14.06 inch
Rear mount baffle cut-out
358 mm / 14.09 inch
Volume occupied by the driver
2.9 liters / 0.11 ft3
Size
Height
174 mm / 6.85 inches
Diameter
388 mm / 15.28 inches
Weight
4.29 kg / 9.46 lbs
Shipping information
Package Height
240 mm / 9.45 inches
Package Width
440 mm / 17.32 inches
Package Depth
440 mm / 17.32 inches
Package Weight
5.9 kg / 13.01 lbs
Downloads
SPECSHEETS
PDF
754 KB
22-01-2024
DRAWINGS
PDF
988 KB
21-03-2018