MZ 8060
AUDIO MATRIX
  • 40-bit floating point processing DSP and 48 kHz 24-bit HI-Q Analogue/Digital Conversion, dynamic range > 112 dB.
  • 8 universal inputs (48V), 6 outputs - 4 Euroblocks bal., 2 RCA plugs
  • 10 programmable logic inputs (GPI), 6 programmable logic outputs (GPO), 2 of which supported by relay.
  • Extended range of processing options
  • 40-bit floating point processing DSP and 48 kHz 24-bit HI-Q Analogue/Digital Conversion, dynamic range > 112 dB.
  • 8 universal inputs (48V), 6 outputs - 4 Euroblocks bal., 2 RCA plugs
  • 10 programmable logic inputs (GPI), 6 programmable logic outputs (GPO), 2 of which supported by relay.
  • Configurable parametric EQs, gates, compressors, limiters, delays, priority levels, automatic gain control, levels, gains on in-out and cross points, auto-mixer operations, filters
  • Each unit can work as dual-room combiner with independent auto-mixer facility for each room
  • Configurable ALC (Automatic Level Control) facility by using Input 8 to connect a noise detection microphone. The control is then assignable to any output or group of outputs
  • USB connectivity for device configuration
  • RDNet Networked Control
MZ 8060 is a highly versatile digital audio matrix designed on a powerful DSP platform, based on advanced electronics. It features a 8x6 matrix, where 8 universal MIC-LINE inputs and 6 outputs can be processed through a large number of audio parameters, such as parametric equalizers, compressors, gates, limiters, delays, duckers, priorities, auto-mixer. The Automatic Level Control facility is also available, a probe can be connected on input 8, in order to automatically adjust the volume level according to the environmental noise measured. MZ 8060 is able to receive 10 logic inputs (GPI) and send 6 logic outputs (GPO), assignable. 2 of these outputs are operated by a relay. A serial port can be set to control the unit from a third party system (e.g. Crestron and AMX). Moreover, it is possible to link two MZ 8060 (in master-slave configuration) to create a 16-input 12-output matrix.
A slot on the rear panel allows the integration of an optional RCF RDNet module, to access MZ 8060 through an RDNet control network. Up to 12 paging consoles BM 3003 can be daisy-chained to the dedicated RJ 45 input, alternative on input 1. The front panel integrates several LED indicators to allow the supervision of the audio input and output activities. A dedicated PC Control Software, embedded into RDNet environment is available for unit setup and control: if the optional RDNet module is not installed, a standard USB connector is located on the front panel. It is suitable for 19’’ rack mounting (1U). MZ 8060 uses a 50W power supply, 100-240VAC, 50/60Hz.

Artikel-Nummer:

  • 17100004
    MZ 8060
    EAN 8024530014490

RCF RDNet 3.0

VERNETZTE STEUERUNG UND VERWALTUNG
Die neueste Version von RDNet wartet mit umfassenden Verbesserungen auf. Das Audiosystem kann jetzt in Form von Lautsprechergruppen oder den neuen Array-Clustern konfiguriert werden, die Präzision und Steuerung von Low-mid- und Luftabsorbtions-Kompensation sowie FiRPHASE-Gain wurden optimiert. Die Subwoofer-Konfiguration erfolgt selbst bei komplexen End-Fire-Setups deutlich schneller.

Read More

TOUCH CONTROL PANEL

The RCF TS 9918 touch sensitive remote control provides flexible external control of several functions. All the buttons and the scroll-wheel are fully configurable using the PC Control Software and the slim-line structure allows installation in any environment. Three backlight operation modes are available according to the application: night, eco, and daylight

Read More

ELECTRONICS

The MZ 8060 is based on a modern 40-bit floating point processing DSP and 48 kHz 24-bit HI-Q Analogue/Digital Conversion, with over 112 dB of dynamic range. The DSP is capable of an extensive range of processing: parametric EQs, gates, compressors, limiters, delays, priority levels, automatic gain control, levels, gains on in-out and cross points, auto-mixer operations and crossover filters.

Spezifikationen
Akustische Performance
Verzerrung (THD+N) @ 1 kHz :
<0.01 %
Dynamikumpfang:
>114 dB
Frequenzgang (-3dB):
20 Hz ÷ 20 kHz
Steuerung
Konfiguration:
PC Software
Anzahl an Programmen/Presets:
16
Priorität:
Yes
Protokolle für die Systemintegration:
ASCII
Digitale Audioperformance
A/D - D/A Konverter (bit):
24
Samplerate (kHz):
48
Input-Sektion
Symmetrisch:
9
Mic + Line Anschluss:
Euroblock, RCA
Mix + Line Eingänge:
8
Mic + Line Phantom:
48 V DC
Mono :
9
Sprechstellen Kommando:
Contact
Sprechstellenanschluss:
RJ45
Sprechstelleneingang:
1
Gesamtzahl an Eingängen:
9
Ausgangs-Sektion
Schaltkontaktausgänge (GPO):
10
Programmierbare GPO:
Yes
Ausgangsbuchsen:
Euroblock, RCA
Signal-Ausgangsnummer:
6
Physikalische Daten:
Gehäuse Material:
Metal
Rack-Einbau:
19", 1U
Strombedarf
Betriebsspannung:
90-240 V~ 50/60Hz
Stromverbrauch (W):
60 W
Prozessing
Automatische Gain Regelung (AGC):
Yes
Kompressoren:
Yes
DSP :
Yes
EQ-Filter:
Yes
Schutzschaltungen
Kühlung:
Convection
Sicherung:
Yes
Versandinformationen
Verpackung Tiefe:
480 mm / 18.9 inches
Verpackung Höhe:
170 mm / 6.69 inches
Verpackungsgewicht:
5 kg / 11.02 lbs
Verpackung Breite:
575 mm / 22.64 inches
Größe
Tiefe:
320 mm / 12.6 inches
Höhe:
44 mm / 1.73 inches
Gewicht:
4.5 kg / 9.92 lbs
Breite:
482 mm / 18.98 inches
Standardkonformität
CE Zeichen:
Yes
.