- 3 Class-D-Endstufen mit 1250 Watt Dauerleistung (RMS)
- 135 dB maximaler Schalldruckpegel
- 6 Neodym-Hochleistungswandler
- Vernetzte Steuerung über RDNet

- 3 Class-D-Endstufen mit 1250 Watt Dauerleistung (RMS)
- 135 dB maximaler Schalldruckpegel
- 6 Neodym-Hochleistungswandler
- 100° x 15° Constant-Directivity-Abdeckung
- DSP mit Floating-Point-Signalverarbeitung 96 kHz / 32 Bit
- Vernetzte Steuerung über RDNet
- Maximaler Output bei geringer Größe
- Vernetzte Steuerung über RDNet

RCF RDNet 3.0
VERNETZTE STEUERUNG UND VIELES MEHR
RDNet ist eine solide vernetzte Management- und Steuerungsplattform für kleine, mittelgroße und großformatige Beschallungsanlagen sowie für komplexe und umfangreiche Festinstallationen. RDNet basiert auf einem proprietären Netzwerkprotokoll, das die intuitive Steuerung und Überwachung jedes einzelnen Geräts oder Objekts im RCF Audio-System ermöglicht. Mittels digitaler Signalverarbeitung für jedes Gerät können Presets oder Parameteranpassungen an einzelne Objekte oder Gruppen von Objekten gesendet werden. Netzwerknutzer können Pegel, Delay, EQ (auch phasenlineares FiR) und weitere Einstellungen ändern. Dies schließt auch die erweiterte Subwoofer-Konfiguration mit ein. RDNet ist nicht nur für Lautsprecher konzipiert – Sie können damit das Routing und Parameter verschiedenster RCF-Geräte steuern, z.B. digitale Matrizen oder Verstärker.
FiRPHASE on TT+ and HDL series
This active speaker can be upgraded with FiRPHASE.
Please download the latest RDNet software release and follow the upgrade procedure to enhance the speaker processing with FiRPHASE.
The Firmware Upgrade is simple and automated:
• connect the device to RDNet
• the system immediately checks the Firmware version and upgrades it if needed.
The sound of the upgraded system will change significantly. Note that the new upgraded modules will not be compatible with the older ones.
DER AKTIVE VORTEIL
Bei einer aktiven Beschallungsanlage sind die Leistungsendstufen direkt in die Lautsprechergehäuse eingebaut. Dies bringt einige Vorteile:

STATE OF THE ART CLASS-D AMPLIFIERS
The final amplifier section power capability provides extreme output bursts in a specific frequency range when needed. The power supply feeds 3 class-D amplifier sections: 500W+500W+250W (LF+MF+HF). Allowing up to 100 ms burst-signal handling thanks to the extra capacitor bus. The amplifier integrates a low noise 96 kHz, 32-bit floating point DSP circuit to compute FiRPHASE, soft clipping limiters, RMS limiters, polarity, amplitude, timing and equalization. All the control settings, monitoring of each component and other advanced features are RCF TT+integrated in the RDNet Networked Management software.

RCF PRECISION TRANSDUCERS
Thanks to the in-house transducers design and manufacturing for no-compromise performances, the TTL 33-A is the best sounding medium format line source array from RCF.

CABINET
The carefully engineered TTL33-A II cabinet packs the maximum output and superb sound quality in the minimum size possible. The electronics housing fits and seals the rear of the cabinet. Two recessed panels protect all the signal connectors. The water-resistant cabinet is the result of a careful treatment of the high-quality Baltic Birch plywood. The heavy-duty polyurea paint creates a very thick full coating making the cabinet highly resistant to scratches and bumps. The heavy duty front grille is powder coated. A special transparent-to-sound foam backing on the inside of the grille helps to further protect the transducers from dust.
High strength structural Swedish steel mechanics guarantees a yielding strength almost 4 times stronger compared to commercial grade steel and maintains the mechanical properties down to –40° C. The rigging system features 8 splay angles, from 0° to 7° with 1° step increment.
