Merkmale
  • 4,0 - inch Inside/Outside copper voice coil
  • 3000 Watt continuous program power handling
  • 97 dB Sensitivity
  • 25 Hz - 1 kHz Frequency range
  • Hypervented magnetic structure for minimum power compression
  • Triple roll surround and exponential cone geometry
  • Double aluminum demodulation rings

The LF18N408 is an extended low frequency with high power handling, designed to provide powerful and accurate bass frequencies with low distortion, low power compression and very high SPL. The LF18N408 uses a fibre loaded cone assembly along a large triple roll surround, this combination provides remarkable strength and control. The single spider system is specifically designed with a heavy cloth which ensures excellent control during large excursions. A fully optimized T-pole together with doublendemodulating rings are designed to reduce flux modulations with benefits on harmonic and intermodulation distortions while improving the transient response. The Dual-forced air venting magnetic structure system provides a very efficient voice coil ventilation to minimize the power compression.

Part number:

11100145
LF18N408

Spezifikationen
Allgemeine spezifikationen
Nominal Durchmesser
18 inch / 457 mm
Anschlussimpedanz (Ohm)
8 ohm
Programm Power (Watt)
3000 W
Belastbarkeit
1500 W
Empfindlichkeit (dB)
97.0 dB
Frequenzbereich
25 - 1000 Hz
Nenndurchmesser Membran
395 mm / 15.55 inch
Maximale Auslenkung vor Schaden
58 mm / 2.28 inch
Minimale-Impedanz (Ohm)
6.0 ohm
Schwingspulendurchmesser
4.0 inch / 102 mm
Spulenlänge
38 mm / 1.5 inch
Layeranzahl
2
Art von Schichten
inside/outside
Obere Polplattenstärke
15 mm / 0.59 inch
Konusdesign
Curved
Surround Design
Triple roll
hyperventilierte magnetische Struktur
Yes
Number of Demodulation
2
Kupfer Induktionsring
Yes
Thiele - small parameters
Resonanzfrequenz (Fs) (Hz)
30 Hz
Gleichstromwiderstand (Re) (Ohm)
4.30 ohm
Mechanische Güte (Qms)
3.60 Qms
Elektrische Güte (Qes)
0.36 Qes
Gesamt Q-Faktor (Qts)
0.33 Qts
Kraftfaktor (BL-Factor) (T x m)
25.70 T x m
effektiv bewegte Masse (Mms)(g)
284.0 g
Äquivalentes Luftnachgiebigkeitsvolumen (Vas) (Liter)
193.0 liters
effektive Membranfläche (Sd) (m2)
0.122 m2
Maximale lineare Auslenkung (Xmax) (mm)
15 mm
Schwingspuleninduktivität L @ 1kHz (Le1k) (mH)
1.56 mH
Halbraum-Wirkungsgrad r=1m (eff) (%)
1.57%
Montagehinweise
Gesamtdurchmesser
465 mm / 18.31 inches
Lochdurchmesser
7 mm / 0.28 inch
Ausschnittsgröße bei frontaler Montage
424 mm / 16.69 inch
Schallwandöffnung für rückseitige Montage
425 mm / 16.73 inch
Vom Treiber verdrängtes Volumen (bei frontaler Montage)
5.5 liters / 0.22 ft3
Größe
Höhe
223.5 mm / 8.8 inches
Durchmesser
465 mm / 18.31 inches
Ausschnittsgröße
423 mm / 16.65 inches
Gewicht
9 kg / 19.84 lbs
Versandinformationen
Verpackung Höhe
270 mm / 10.63 inches
Verpackung Breite
520 mm / 20.47 inches
Verpackung Tiefe
495 mm / 19.49 inches
Verpackungsgewicht
10.2 kg / 22.49 lbs
Downloads
DATENBLÄTTER
PDF
414 KB
22-01-2024