Caratteristiche
  • 4,0 - inch Inside/Outside copper voice coil
  • 3000 Watt continuous program power handling
  • 97 dB Sensitivity
  • 25 Hz - 1 kHz Frequency range
  • Hypervented magnetic structure for minimum power compression
  • Triple roll surround and exponential cone geometry
  • Double aluminum demodulation rings

The LF18N408 is an extended low frequency with high power handling, designed to provide powerful and accurate bass frequencies with low distortion, low power compression and very high SPL. The LF18N408 uses a fibre loaded cone assembly along a large triple roll surround, this combination provides remarkable strength and control. The single spider system is specifically designed with a heavy cloth which ensures excellent control during large excursions. A fully optimized T-pole together with doublendemodulating rings are designed to reduce flux modulations with benefits on harmonic and intermodulation distortions while improving the transient response. The Dual-forced air venting magnetic structure system provides a very efficient voice coil ventilation to minimize the power compression.

Part number:

11100145
LF18N408

Specifiche tecniche
Specifiche generali
Diametro Nominale
18 inch / 457 mm
Impedenza nominale (ohm)
8 ohm
Potenza musicale (watt)
3000 W
Potenza
1500 W
Sensibilità (dB)
97.0 dB
Gamma di frequenza
25 - 1000 Hz
Diametro effettivo del pistone
395 mm / 15.55 inch
Escursione max prima della rottura
58 mm / 2.28 inch
Impedenza Minima (ohm)
6.0 ohm
Diametro Bobina
4.0 inch / 102 mm
Lunghezza della bobina
38 mm / 1.5 inch
Numero di strati
2
Strati bobina (tipologia)
inside/outside
Spessore piastra superiore
15 mm / 0.59 inch
Design del cono
Curved
Design del surround
Triple roll
Struttura Magnetica Hypervented
Yes
Anelli di demodulazione
2
Anello di demodulazione
Yes
Parametri di Thiele & Small
Frequenza di Risonanza (Fs) (Hz)
30 Hz
Resistenza (Re) (ohm)
4.30 ohm
Fattore di merito meccanico (Qms)
3.60 Qms
Fattore di merito elettrico (Qes)
0.36 Qes
Fattore di qualità totale (Qts)
0.33 Qts
Fattore Bl (Bl) (T x m)
25.70 T x m
Massa mobile effettiva (Mms) g
284.0 g
Volume equivalente alla cedevolezza (Vas) (litri)
193.0 liters
Area del pistone effettiva (Sd) (m2)
0.122 m2
Massima escursione lineare (Xmax) (mm)
15 mm
Induttanza della bobina @ 1 kHz (Le1k) (mH)
1.56 mH
Efficienza Half-Space (Eff) (%)
1.57%
Informazioni di montaggio
Diametro complessivo
465 mm / 18.31 inches
Diametro foro vite
7 mm / 0.28 inch
Foro montaggio anteriore al pannello
424 mm / 16.69 inch
Alloggiamento posteriore
425 mm / 16.73 inch
Volume occupato dal driver
5.5 liters / 0.22 ft3
Dimensioni
Altezza
223.5 mm / 8.8 inches
Diametro
465 mm / 18.31 inches
Diametro di taglio
423 mm / 16.65 inches
Peso
9 kg / 19.84 lbs
Informazioni di spedizione
Altezza imballaggio
270 mm / 10.63 inches
Larghezza imballaggio
520 mm / 20.47 inches
Profondità imballaggio
495 mm / 19.49 inches
Peso imballaggio
10.2 kg / 22.49 lbs
Downloads
SPECIFICHE TECNICHE
PDF
414 KB
22-01-2024