Merkmale
  • 4.0 - inch Inside/Outside copper voice coil
  • 3000 Watt continuous program power handling
  • 98.0dB Sensitivity
  • 25Hz - 1kHz Frequency range
  • Dual-forced air ventilation for minimum power compression
  • Dual spider designed with silicon based damping control
  • BL of 27.6 T/m to provide a faster and accurate low frequency

The LF21N401 is a high power handling and efficiency transducer specially designed to provide powerful and accurate sub-bass frequencies with low distortion and low power compression. With a fast time response, the LF21N401 uses a fiber loaded cone assembly along a large triple roll surround. This combination provides emarkable strength and control. Double silicon spider system ensures excellent control during large excursions. A fully optimized T-pole design generate the minimum amount of flux modulation. The Dual-forced air venting system provides a very efficient voice coil ventilation to minimize the power compression.

Part number:

11100120
LF21N401
8ohm

Spezifikationen
Allgemeine spezifikationen
Nominal Durchmesser
21 inch / 533 mm
Anschlussimpedanz (Ohm)
8 ohm
Programm Power (Watt)
3000 W
Belastbarkeit
1500 W
Empfindlichkeit (dB)
98.0 dB
Frequenzbereich
25 - 1000 Hz
Nenndurchmesser Membran
470 mm / 18.5 inch
Maximale Auslenkung vor Schaden
60 mm / 2.36 inch
Minimale-Impedanz (Ohm)
7.0 ohm
Schwingspulendurchmesser
4.0 inch / 102 mm
Spulenlänge
31 mm / 1.22 inch
Layeranzahl
2
Art von Schichten
inside/outside
Obere Polplattenstärke
15 mm / 0.59 inch
Konusdesign
Curved
Surround Design
Triple roll
Doppelbelüftung (Innen/Aussen)
Yes
Thiele - small parameters
Resonanzfrequenz (Fs) (Hz)
30 Hz
Gleichstromwiderstand (Re) (Ohm)
5.00 ohm
Mechanische Güte (Qms)
6.80 Qms
Elektrische Güte (Qes)
0.40 Qes
Gesamt Q-Faktor (Qts)
0.37 Qts
Kraftfaktor (BL-Factor) (T x m)
27.60 T x m
effektiv bewegte Masse (Mms)(g)
318.0 g
Äquivalentes Luftnachgiebigkeitsvolumen (Vas) (Liter)
374.0 liters
effektive Membranfläche (Sd) (m2)
0.173 m2
Maximale lineare Auslenkung (Xmax) (mm)
11 mm
Schwingspuleninduktivität L @ 1kHz (Le1k) (mH)
1.70 mH
Halbraum-Wirkungsgrad r=1m (eff) (%)
2.50%
Montagehinweise
Gesamtdurchmesser
547 mm / 21.54 inches
Lochkreis Durchmesser
527 mm / 20.75 inch
Lochdurchmesser
6 mm / 0.24 inch
Ausschnittsgröße bei frontaler Montage
512 mm / 20.16 inch
Schallwandöffnung für rückseitige Montage
512 mm / 20.16 inch
Vom Treiber verdrängtes Volumen (bei frontaler Montage)
6.5 liters / 0.26 ft3
Größe
Höhe
234 mm / 9.21 inches
Durchmesser
547 mm / 21.54 inches
Gewicht
9.2 kg / 20.28 lbs
Versandinformationen
Verpackung Höhe
605 mm / 23.82 inches
Verpackung Breite
585 mm / 23.03 inches
Verpackung Tiefe
605 mm / 23.82 inches
Verpackungsgewicht
10 kg / 22.05 lbs
Downloads
DATENBLÄTTER
PDF
617 KB
22-01-2024
ZEICHNUNGEN
PDF
570 KB
21-03-2018
ZIP
5,2 MB
22-01-2024