L8S800
WOOFER
  • 1.5-inch, Kapton former, copper voice coil
  • 340W continuous program power handling
  • 93 dB Sensitivity
  • 50 Hz – 4 kHz Frequency range
  • 1.5-inch, Kapton former, copper voice coil
  • 340W continuous program power handling
  • 93 dB Sensitivity
  • 50 Hz – 4 kHz Frequency range
  • Exponential, high strength, carbon fiber cone
  • M-roll damped surround
Very high linearity and low distorsion are special features of this carbon-fiber cone transducer.
The use of an RCF exponential carbon-fiber cone of exceptional strength and light weight drastically reduces the break-up, thus ensuring a high level of effciency and excellent transient response. The cone is completely water-repellent. Maximum care in the selection of the components and in the assembly process make the L8S800 an extremely reliable woofer.

Part Number:

  • 11120007
    L8S800
Specifications
General specifications
Nominal Diameter:
8 inch / 203 mm
Rated Impedance:
8 ohm
Program Power:
340 W
Power handling capacity:
170 W
Sensitivity:
93 dB
Frequency range:
50 - 4000 Hz
Effective piston diameter:
165 mm / 6.5 inch
Max. Excursion Before Damage:
30 mm / 1.18 inch
Minimim Impedance:
7 ohm
Voice Coil Diameter:
1.5 inch / 38 mm
Voice Coil Winding Material:
Copper
Voice Coil Length:
15 mm / 0.59 inch
Number of layers:
2
Kind of layers:
outside
Top Plate Thickness:
7 mm / 0.28 inch
Cone Design:
Curved
Surround Material:
Polycotton
Surround Design:
M-roll
Magnets:
Ceramic
Spider:
Single
Thiele - small parameters
Resonance frequency (Fs):
60 Hz
DC resistance (Re):
6.10 ohm
Mechanical factor:
4.10 Qms
Electrical factor (Qes):
0.46 Qes
Total factor:
0.41 Qts
BL factor (BL):
10.30 T x m
Effective moving mass (Mms):
21 gr
Equivalent Cas air loaded (Vas):
22 liters
Effettive piston area (Sd):
0.02 m2
Max. linear excursion (Xmax):
6 mm
Voice coil inductance @ 1kHz (Le1k):
0.90 mH
Half-space efficency (Eff):
1.00%
Mounting Information
Overall diameter:
239 mm / 9.41 inches
Bolt circle diameter:
221 mm / 8.7 inch
Bolt hole diameter:
7 mm / 0.28 inch
Front mount baffle cut-out:
184 mm / 7.24 inch
Rear mount baffle cut-out:
184 mm / 7.24 inch
Volume occupied by the driver:
0.8 liters / 0.03 ft3
Standard compliance
CE marking:
Yes
Size
Weight:
3.5 kg / 7.72 lbs
Height:
99 mm / 3.9 inches
Diameter:
208 mm / 8.19 inches
Shipping informations
Package Width:
220 mm / 8.66 inches
Package Weight:
3.8 kg / 8.38 lbs
Package Height:
150 mm / 5.91 inches
Package Depth:
220 mm / 8.66 inches
.