ZM 2100
6 ZONES PREAMPLIFIED MASTER UNIT
  • Dual-bus system architecture
  • System Paging consoles input for up to 6 selective devices daisychained, aux input and overall emergency input on precedence primary bus
  • 4 inputs of which 2 microphone and 2 universal, 3 selectable aux inputs with individual volume and tone controls with configurable priority on secondary bus
  • Interconnection terminals for power amplifiers to manage primary and secondary buses independently, using 100V single or dual amplifier configuration or 0dB multi-amplifier configuration according to system requirements
  • Dual-bus system architecture
  • System Paging consoles input for up to 6 selective devices daisychained, aux input and overall emergency input on precedence primary bus
  • 4 inputs of which 2 microphone and 2 universal, 3 selectable aux inputs with individual volume and tone controls with configurable priority on secondary bus
  • Interconnection terminals for power amplifiers to manage primary and secondary buses independently, using 100V single or dual amplifier configuration or 0dB multi-amplifier configuration according to system requirements
  • Switches with indicators to send or not the secondary bus program (i.e. music) on each of the 6 output zones
  • Link to connect up to eight ZE 2200 6six-zone expansion units so to built-up paging systems in excess of 50 zones.
  • Priority indicator to show when any system priority circuit has been triggered
  • Selectable chime generator is available on announcements
  • GPI and GPO logic ports are available for interface purposes with third parties systems and for monitoring feedback.
  • Dedicated wall mounting system remote control allows you to remote the main commands available on the master unit
ZM 2100 is the system main unit that includes a preamplifier with 6-zone selection (no internal amplifier). It allows to choose either a power-sharing configuration by using one or two external amplifiers (the second is needed to keep music in zones not paged) for all the 6 zones or to use an amplifier (or more) per each zone. As the amplified main unit, also ZM 2100 has input connectors for sources and can manage priority and route the two buses to the system zones.

Part Number:

  • 17170166
    ZM 2100
    EAN 8024530010249
Specifications
Amplifier specifications
Distortion (THD+N) @ 1 kHz nominal power:
<1 %
Frequency Response (-3dB):
50 Hz ÷ 20 kHz
Number of channels:
6
Power output (@ 100 V):
240 W RMS
Signal/noise rate (”A” weighted):
>75 dB
Controls
Chime tone:
Yes
Configuration:
Front panel
Music on hold:
Yes
Priority:
Yes
Processing
Tone controls:
Yes
Input section
Balanced:
6
General Purpose Inputs (GPI):
10
Line connectors:
RCA
Mic connectors:
XLR
Line inputs:
2
Mic inputs:
2
Mic+Line connectors:
XLR
Mic+Line inputs:
2
Mic+Line Phantom:
17.5 V DC
Mic Phantom:
17.5 V DC
Mono:
6
Paging command:
Contact
Paging connectors:
RCA, RJ45
Paging inputs:
3
Programmable GPI:
Yes
Stereo:
3
Total number of inputs:
9
Unbalanced:
3
Output section
Signal output connectors:
XLR
General Purpose Outputs (GPO):
10
Power output connectors:
Euroblock
Signal output number:
2
Physical specifications
Cabinet/Case Material:
Metal
Rack mounting:
19", 3U
Power requirement
DC power:
Yes
DC power value:
24 V
Operating voltage:
220-240/115 V~ 50/60Hz
Power consumption:
100 W
Voltage selection:
External
Protections
Cooling:
Convection
Size
Package Depth:
490 mm / 19.29 inches
Package Height:
296 mm / 11.65 inches
Package Weight:
10.6 kg / 23.37 lbs
Package Width:
580 mm / 22.83 inches
Depth:
365 mm / 14.37 inches
Height:
133 mm / 5.24 inches
Weight:
8.2 kg / 18.08 lbs
Width:
430 mm / 16.93 inches
Standard compliance
CE marking:
Yes
System specifications
Communication bus:
Serial
Max number of console:
6
Max number of units connectable:
9
Number of console buses:
1
Number of zones managed:
54
Connection cables:
FTP CAT 5
.