Merkmale
  • 4,5 - inch fiberglas Inside/Outside copper voice coil
  • 3600 Watt continuous program power handling
  • 97 dB Sensitivity
  • 30 Hz - 1 kHz Frequency range
  • Dual Forced Hyperventing System
  • Dual spider designed with silicon based damping control
  • BL of 30.5 Txm to provide a faster and accurate low frequency

Incredibly linear frequency response characteristics, the highest power handling of any comparable 18-inch transducer, the lowest power compression. The LF18X451 features a fibre loaded cone assembly along with a high excursion triple roll, constant geometry surround: this combination provides remarkable strength and a peak to peak maximum excursion of 54 mm. The new dual forced hyper-venting system guarantee a very efficient voice coil ventilation for minimum power compression and incredible power handling. A double silicon spider system ensures excellent control during large excursions. A fully optimised T-pole design generate the minimum amount of flux modulation.

Part number:

11100091
LF18X451
8ohm

Spezifikationen
Allgemeine spezifikationen
Nominal Durchmesser
18 inch / 457 mm
Anschlussimpedanz (Ohm)
8 ohm
Programm Power (Watt)
3600 W
Belastbarkeit
1800 W
Empfindlichkeit (dB)
97.0 dB
Frequenzbereich
30 - 1000 Hz
Nenndurchmesser Membran
395 mm / 15.55 inch
Maximale Auslenkung vor Schaden
54 mm / 2.13 inch
Minimale-Impedanz (Ohm)
6.8 ohm
Schwingspulendurchmesser
4.5 inch / 114 mm
Spulenlänge
34 mm / 1.34 inch
Layeranzahl
2
Art von Schichten
inside/outside
Obere Polplattenstärke
15 mm / 0.59 inch
Konusdesign
Straight
Surround Design
Triple roll
Doppelbelüftung (Innen/Aussen)
Yes
Thiele - small parameters
Resonanzfrequenz (Fs) (Hz)
30 Hz
Gleichstromwiderstand (Re) (Ohm)
5.40 ohm
Mechanische Güte (Qms)
6.70 Qms
Elektrische Güte (Qes)
0.29 Qes
Gesamt Q-Faktor (Qts)
0.28 Qts
Kraftfaktor (BL-Factor) (T x m)
30.50 T x m
effektiv bewegte Masse (Mms)(g)
260.0 g
Äquivalentes Luftnachgiebigkeitsvolumen (Vas) (Liter)
220.0 liters
effektive Membranfläche (Sd) (m2)
0.120 m2
Maximale lineare Auslenkung (Xmax) (mm)
14 mm
Schwingspuleninduktivität L @ 1kHz (Le1k) (mH)
1.38 mH
Halbraum-Wirkungsgrad r=1m (eff) (%)
1.90%
Montagehinweise
Gesamtdurchmesser
465 mm / 18.31 inches
Lochkreis Durchmesser
442-447 mm / 17.4-17.6 inch
Lochdurchmesser
7 mm / 0.28 inch
Ausschnittsgröße bei frontaler Montage
424 mm / 16.69 inch
Schallwandöffnung für rückseitige Montage
424 mm / 16.69 inch
Vom Treiber verdrängtes Volumen (bei frontaler Montage)
6.5 liters / 0.26 ft3
Standardkonformität
Safety agency
CE compliant
Größe
Höhe
212 mm / 8.35 inches
Durchmesser
465 mm / 18.31 inches
Gewicht
15.2 kg / 33.51 lbs
Versandinformationen
Verpackung Höhe
254 mm / 10 inches
Verpackung Breite
524 mm / 20.63 inches
Verpackung Tiefe
494 mm / 19.45 inches
Verpackungsgewicht
17 kg / 37.48 lbs
Downloads
DATENBLÄTTER
PDF
510 KB
22-01-2024
ZEICHNUNGEN
PDF
366 KB
21-03-2018
ZIP
231 KB
22-01-2024