The NX 9 series is masterfully engineered to deliver stellar audio performances for solo musicians, bands, and DJs

 


The new bi-amplified 2100 W electroacoustic design provides impressive sound pressure levels, when used in open-air and at long distances, with remarkable sound quality. The combination of purpose-designed transducers, advanced DSP processing, and a constant directivity waveguide produces coherent coverage on the listening area with distortion-free sound. NX 9 Series includes RCF exclusive FiRPHASE and Bass Motion Control algorithms, perfectly tuned for each model, and delivers absolute clarity for vocal reproduction and deep, powerful bass response. RCF durability and reliability are always built-in. The tour-ready, rugged all-wood cabinet is easy to carry and can be pole-, flown-, wall-, or truss-mounted using the multiple rigging points available.

 

 

 

One input, the one that sounds good

 

Plug the output of your mixer or audio device into the Line-in Combo (TRS+XLR) Input. The extremely low noise input circuit will deliver an unaltered and clean signal to the power amplifier.

 

 

1 - Balanced Line Input
2 - Balanced Line Link/Output
3 - Volume Control [rotate to adjust the volume]
4 - Status LEDs: Signal [green - safe input level] and Overload [red - limiting in action]
5 - Preset Selection Button
6 - Presets:
LINEAR - Finely tuned sound for best clarity
BOOST - Enhanced loudness for background music or punchy bass
STAGE - Perfect tuning for stage monitoring
7 - Aluminum back panel

 

 

 

 

 

Power that moves

 

The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2100W power, the 2-channel NX 9 Class-D amplifier is 50% more powerful than previous models, able to manage extreme sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. NX 9 is energy-efficient so there's no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the rear of the cabinet - with no moving parts. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All NX 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.

 

 

 

 

 

 

 

 

 

 

Superior Transducers

 

Lightweight and powerful, RCF drivers are a reference in high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components. The new 1.75" voice coil design with Polyimide-Kapton dome features a new bonding technology and reinforcement ribs making it 10 times more rigid than previous models, for increased accuracy and durability. The redesigned phase plug increases sound clarity with less distortion. Low-frequency transducer design gains more stability over higher currents, with less distortion and better heat handling.

 

 

 

Kapton

 

Kapton® is a material extensively used in space and for temperature-resistant insulation. For applications where extremes of heat and vibration are the norm, designers rely on Kapton® because of its ability to maintain its unique combination of mechanical properties under the harshest of conditions.

 

 

 

 

DISCOVER THE
NX 915-A

 

 

 

DISCOVER THE
NX 912-A

 

 

 

DISCOVER THE
NX 910-A

 

 

 

 

 

 

Tour-proven workhorse

NX 9 can operate as either the main system or as a floor monitor. This flexibility makes it a smart choice for a wide range of live sound applications. The rugged all-wood cabinet is easy to carry, thanks to handles on both sides (one on top for NX 910-A). The lower side includes a steel pole socket for mounting on a stand or a subwoofer pole. Each model can also be flown, wall- or truss-mounted using the six included M10 rigging points and special accessories. From the wood cabinet to the final texture and the rugged protective grille, NX 9 offers maximum strength for intensive use on the road and can be used for fixed installation.

 

 

 

 

 

 

 

 

 

 

When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. Speakers with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.

 

 

The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive, but change the phase behavior, the new BMC algorithm breaks conventional rule. In combination with FiRPHASE technology, ART 9 & NX 9 have a level of DSP audio performance never achieved in this range of speakers.

 

 

 

 

 

 

 

 

New perspective on linearity

RCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

 

READ MORE

 

 

 

 

 

 

 

 

 

 

NX 9 BROCHURE

 

Download

 

 

 

 

 

 

 

 

 

 

 

BACK TO THE PRODUCTS

 

 

 

.