TTL 55-A
MODULO LINE ARRAY ATTIVO A TRE-VIE
  • Amplificazione digitale da 3500 W a 4 vie
  • 6 altoparlanti in neodimio ad alta potenza
  • Processore di Segnale Digitale 96 kHz, 32 bit
  • RDNet on board
  • Cabinet e meccaniche per touring di alto livello
  • Amplificazione digitale da 3500 W a 4 vie
  • 6 altoparlanti in neodimio ad alta potenza
  • Scheda ingressi analogica di alta qualità
  • Processore di Segnale Digitale 96 kHz, 32 bit
  • Monitoraggio e controllo remoti
  • Massima potenza d'uscita sul mercato
  • RDNet on board
Il TTL55-A è un modulo line array a tre vie ad alta potenza realizzato per fornire un’incredibile potenza d’uscita per un utilizzo sia al chiuso che in grandi spazi all’aperto. Il nuovo sistema è stato studiato per essere facilmente scalabile da pochi moduli per gli eventi più piccoli fino a una configurazione ad array completo per eventi di grandi dimensioni negli stadi o in grandi spazi aperti.
I tre nuovi trasduttori del TTL55-A sono il risultato di numerosi anni dedicati allo studio di soluzioni all’avanguardia utilizzando i migliori materiali presenti sul mercato. L’integrazione dell’amplificazione digitale da 3500 W a quattro canali e l’avanzata elaborazione digitale del segnale fissano un nuovo standard per l’efficienza dei livelli di distorsione, rumore e temperatura.

Codice:

  • 13000188
    TTL 55-A
    220-240V
    EAN 8024530008598
  • 13000189
    TTL 55-A
    115V
    EAN 8024530008604

RCF RDNet 3.0

MONITORING AND MANAGEMENT NETWORK
The new RDNet release features extensive improvements. The audio system is now configurable in Groups of speakers or in the new Array clusters, the Air Compensation and the Cluster Size shaping are more precise and controllable, as well as the FiRPHASE gain. The subwoofer configuration is faster, even for complex EndFire set-ups.

Read More

ACTIVE ADVANTAGE

An active sound system means having the power amplifier on-board of the cabinet. This brings some advantages:

  • Reduced setup time
  • Daisy chain signal and power connection of the entire system or by groups
  • No additional amplifier rack(s), saving space in the truck
  • The sound quality and performance are optimized to the individual components inside the speaker
  • The RDNet Networked Control can monitor each component of the system
  •  

    Read more about TT+

    STATE OF THE ART CLASS-D AMPLIFIERS

    Four independent Class-D amplifiers with Power Factor Correction, 2x1000W+1000W+500W (LF+MF+HF), delivering an astonishing output power of 3500 W per module, making the TTL55-A one of the most powerful line arrays module on the market. The amplifier integrates a low noise 96 kHz, 32-bit floating point DSP circuit to compute FiRPHASE, soft clipping limiters, RMS limiters, polarity, amplitude, timing and equalization. All the control settings, monitoring of each component and other advanced features are integrated in the RDNet Networked Management software.

    NEODYMIUM RCF PRECISION TRANSDUCERS

    Thanks to the in-house transducers design and manufacturing for no-compromise performances, the TTL 55-A is the RCF flagship line array.

    LOW FREQUENCIES - 2 x 12” low profile neodymium woofers, 4” coice coil, in clam shell band-pass configuration

    MID FREQUENCIES - 1 x 10” neodymium midrange, 2,5” voice coil in horn loaded configuration

    HIGH FREQUENCIES - 3 x 1,5” neodymium compression driver, 2.5” voice coil, titanium dome, in horn-array configuration

     

    Read More

    CABINET AND MECHANICS

    The carefully engineered TTL55-A cabinet packs the maximum output and superb sound quality in the minimum size possible. The electronics housing fits and seals the rear of the cabinet. Two recessed panels protect all the signal connectors. The internal structure is heavily braced to survive long term use and transportation. All the parts are assembled on metal inserts with metric screws. The water-resistant cabinet is the result of a careful treatment of the high-quality Baltic Birch plywood. The heavy-duty polyurea paint creates a very thick full coating making the cabinet highly resistant to scratches and bumps. The front grille is powder coated. A special transparent-to-sound foam backing on the inside of the grille helps to further protect the transducers from dust.

    FiRPHASE on TT+ and HDL series

    Upgrade the firmware on all your speakers.

    The latest RDNet firmware brings FiRPHASE processing to the TTL33-A II, TTL55-A, HDL50-A and HDL53-AS

    The Firmware Upgrade is simple: connect the device to RDNet; the system immediately checks the Firmware version and upgrades it if needed. The sound of the upgraded system will change significantly. Note that the new upgraded modules will not be compatible with the older ones.

    Read More

    Specifiche
    Specifiche acustiche
    Risposta in frequenza:
    50 Hz ÷ 20000 Hz
    SPL max. a 1 m :
    143 dB
    Angolo copertura orizzontale :
    90°
    Angolo copertura verticale :
    Trasduttori
    Driver compressione:
    3 x 1.5'' neo, 2.5'' v.c
    Midrange:
    10'' neo, 3.5'' v.c
    Woofer :
    2 x 12'' neo, 4.0'' v.c
    Sezione Input/Output
    Segnale di ingresso:
    bal/unbal
    Connettori ingresso:
    XLR, RDNet Ethercon
    Connettori uscite:
    XLR, RDNet Ethercon
    Sensibilità ingresso:
    +4 dBu
    Sezione del processore
    Frequenze crossover:
    320 Hz - 1300 Hz
    Protezioni:
    Thermal, Excurs., RMS
    Limitatore:
    Soft Limiter
    Controlli:
    DSP controlled
    RDNet :
    Yes
    Sezione di potenza
    Potenza totale:
    7000 W Peak, 3500 W RMS
    Alte frequenze:
    1000 W Peak, 500 W RMS
    Frequenze medie:
    2000 W Peak, 1000 W RMS
    Frequenze basse:
    4000 W Peak, 2000 W RMS
    Raffreddamento:
    Convection/Forced
    Collegamenti unità:
    Powercon IN/OUT
    Conformità agli standard
    Marcatura CE:
    Yes
    Specifiche fisiche
    Materiale cabinet/cassa:
    Baltic birch plywood
    Hardware:
    Array Fly - Ware
    Maniglie:
    2 Side
    Griglia:
    Steel
    Colore:
    Black
    Dimensioni
    Altezza:
    380 mm / 14.96 inches
    Larghezza complessiva:
    1020 mm / 40.16 inches
    Profondità pacchetto:
    550 mm / 21.65 inches
    Peso pacchetto:
    70.5 kg / 155.43 lbs
    Informazioni di spedizione
    Altezza pacchetto:
    909 mm / 35.79 inches
    Larghezza pacchetto:
    1144 mm / 45.04 inches
    Profondità pacchetto:
    499 mm / 19.65 inches
    Peso pacchetto:
    81 kg / 178.57 lbs
    Video
    Tecnologia RCF FiRPHASE
    Con questa tecnologia abbiamo ottenuto importanti miglioramenti della qualità sonora nel mondo dell'audio professionale. L’algoritmo alla base di FirPhase elabora i dati delle misure in modo da trovare il miglior compromesso possibile tra ampiezza e fase senza snaturarne il comportamento, agendo cioè solo nelle frequenze in cui strettamente necessario. Vengono individuate zone di frequenza in cui un cambiamento di fase non produce cambiamenti sensibili in ampiezza e in quelle zone l’algoritmo ottimizza l’andamento della fase.
    FiRPHASE Technology
    RDNet 3.0 tutorial part 1
    RDNet is a secure and robust management for small, medium, and arena-sized sound systems as well as complex and extended installations. Based on a proprietary network protocol RDNet provides straightforward monitoring and intuitive control of the RCF audio system down to every connected device/object.
    RDNet 3.0 tutorial part 2
    RDNet is a secure and robust management for small, medium, and arena-sized sound systems as well as complex and extended installations. Based on a proprietary network protocol RDNet provides straightforward monitoring and intuitive control of the RCF audio system down to every connected device/object.
    RDNet 3.0 tutorial part 3
    RDNet is a secure and robust management for small, medium, and arena-sized sound systems as well as complex and extended installations. Based on a proprietary network protocol RDNet provides straightforward monitoring and intuitive control of the RCF audio system down to every connected device/object.
    RDNet 3.0 tutorial part 4
    RDNet is a secure and robust management for small, medium, and arena-sized sound systems as well as complex and extended installations. Based on a proprietary network protocol RDNet provides straightforward monitoring and intuitive control of the RCF audio system down to every connected device/object.
    RDNet 3.0 tutorial part 5
    RDNet is a secure and robust management for small, medium, and arena-sized sound systems as well as complex and extended installations. Based on a proprietary network protocol RDNet provides straightforward monitoring and intuitive control of the RCF audio system down to every connected device/object.
    .