.

INSTALLED SOUND

Download
Catalogue

VSA

Vertical Steerable Array column with powerful and crystal-clear sound.
The advanced beam steering technology allows control of beam width and vertical tilt to precisely reach the listener, without interfering with walls or unwanted areas.

DIGITALLY STEERABLE SOUND COLUMN SPEAKER
  • Power supply 115/230 Vac (600VA); 24 V dc
  • 20 x 3.5" full range speakers
  • Indicators and control for EN 60849 monitoring facility
  • 96 dB Max SPL
DIGITALLY STEERABLE SOUND COLUMN SPEAKER
  • Power supply 115/230 Vac (600VA); 24 V dc
  • 12 x 3.5" full range speakers
  • 94 dB Max SPL
  • Indicators and control for EN 60849 monitoring facility
DIGITALLY STEERABLE SOUND COLUMN SPEAKER
  • 8 x Class D, 50 W amplifiiers
  • Power supply 115/230 Vac (600VA); 24 V dc
  • 8 x 3.5" full range speakers
  • 93 dB Max SPL
NETWORKED CONTROL AND MUCH MORE
  • Auto Scan
  • Array and Zones Grouping
  • Recall and Save System Presets
  • Adjust gain and delay on individual components
HL SYSTEM is a horn loaded two-way full range array system designed for mid distance and long throw applications.
Equipped with the latest generation of RCF precision transducers, this compact system provides very high output and accurate voice and sound reproduction, both clustered for long throw applications or point source configuration for mid distance.
WEATHERPROOF PASSIVE LINE ARRAY MODULE
  • Maximum output per size available on the market
  • Wide, constant directivity, horizontal coverage angle
  • Minimum weight
  • Watertight multi-pole connector IP67
HORN LOADED TWO-WAY ARRAY 22.5° X 90°
  • 2 x 12" RCF Precision woofers with 3.5" voice coil
  • RCF Precision 4.0" voice coli compression driver, titanium dome
  • 141 dB Max SPL
  • System Power rating 1500 Watt RMS (1350 Watt LF, 150 Watt HF)
HORN LOADED TWO-WAY ARRAY 22.5° X 60°
  • 2 x 12" RCF Precision woofers with 3.5" voice coil
  • RCF Precision 4.0" voice coli compression driver, titanium dome
  • 141 dB Max SPL
  • System Power rating 1500 Watt RMS (1350 Watt LF, 150 Watt HF)
HORN LOADED TWO-WAY ARRAY 22.5° X 40°
  • 2 x 12" RCF Precision woofers with 3.5" voice coil
  • RCF Precision 4.0" voice coli compression driver, titanium dome
  • 141 dB Max SPL
  • System Power rating 1500 Watt RMS (1350 Watt LF, 150 Watt HF)
ARRAY SUBWOOFER
  • 18" RCF Precision woofers with 4" voice coil
  • 136 dB Max SPL
  • System Power rating 900 Watt RMS
  • Safe and solid variable array mechanics

Multi trapezoidal system to provide the best output and directivity required for large scale installations.
The system offers designs capable of delivering full range high-efficiency output and controlled directivity in arrayable configurations.

THREE-WAY PASSIVE SPEAKER
  • Compact Arrayable 3-way System
  • 15" neodymium woofer with 4" voice coil
  • 10" neodymium midrange
  • 136 dB Max SPL
THREE WAY INDOOR/OUTDOOR HORN LOADED SPEAKER SYSTEM
  • Compact Arrayable 3-way System
  • 15" neodymium woofer with 4" voice coil
  • 10" neodymium midrange
  • 136 dB Max SPL

V MAX SERIES

Exclusive designs and technologies such as RCF Precision Hyper-vented Woofers and high power, low distortion neo compression drivers, "CMD" Coverage Matching Design horns providing consistent horizontal and vertical pattern control through the usable frequency range. RCF exclusive "LICC" Crossover Systems, matched amplification and control systems fully optimise the high performance and long-term reliability.

FULL RANGE PASSIVE TWO-WAY SPEAKER
  • High power, two-way bass reflex full range system
  • 2 x 15" high power, 4" voice coil hypervented woofers
  • 1 x 4" high power titanium neo compression driver
  • 137 dB max SPL
FULL RANGE PASSIVE TWO-WAY SPEAKER
  • High power, two-way bass reflex full range system
  • 15" high power, 4" voice coil hypervented woofers
  • 1 x 3" high power titanium neo compression driver
  • 132 dB max SPL
HIGH POWER, TWO-WAY BASS REFLEX FULL RANGE SYSTEM
  • 10" high power, 2.5" voice coil mid bass
  • 1 x 2.5" high power titanium neo compression driver
  • 130 dB max SPL
  • 350 Watt AES
HIGH POWER, TWO-WAY BASS REFLEX FULL RANGE SYSTEM
  • 6" high power, 1.8" voice coil mid bass
  • 1 x 1.7" high power titanium compression driver
  • 124 dB max SPL
  • 200 Watt AES
PASSIVE BASS REFLEX SUBWOOFER
  • 4000 Watt AES
  • 2 x 21" high power, 4.5" voice coil hypervented woofers
  • High power, bass reflex subwoofer system
  • 143 dB max SPL
PASSIVE BASS REFLEX SUBWOOFER
  • 3000 Watt AES
  • 2 x 18" high power, 4" voice coil hypervented woofers
  • High power, bass reflex subwoofer system
  • 141 dB max SPL

C MAX SERIES

The full-range passive two-way RCF C MAX series has been specifically designed as a club system for entertainment, to reach the best near field quality, vocal coherence, and stable sound quality even up to the highest volume. The C MAX Series speakers represent a further step in the versatile COMPACT Series. Thanks to the multiple rigging points and rotatable horn, C MAX is perfect for recorded or live music and vocal applications in conference halls, AV installations, public areas and clubs.

FULL RANGE HIGH POWER NEARFIELD SPEAKER
  • 130 dB Max SPL
  • 800 WATT program power handling
  • 60 – 20000 Hz Frequency Range
  • Hi Resolution Custom RCF Precision Transducer
FULL RANGE HIGH POWER NEARFIELD SPEAKER
  • 128 dB Max SPL
  • 700 WATT program power handling
  • 65 – 20000 Hz Frequency Range
  • Heavy-duty birch plywood coated with black textured epoxy

E MAX SERIES

The full-range passive two-way RCF E MAX series has been designed as multi purpose speaker, to achieve the best nearfield quality, vocal coherence and a stable tonal balance even at high volume.

FULL RANGE HIGH POWER NEARFIELD SPEAKER
  • 129 dB SPL Max
  • 350 W AES power rating
  • 55 – 20000 Hz Frequency Range
  • 1” Compression Driver, 12” Woofer Hi Resolution Transducers
FULL RANGE HIGH POWER NEARFIELD SPEAKER
  • 128 dB SPL Max
  • 300 W AES power rating
  • 60 – 20000 Hz Frequency Range
  • 1” Compression Driver, 10” Woofer Hi Resolution Transducers

COMPACT SERIES

The Compact Series is a powerful and highly advanced range of passive near-field two-way direct radiating loudspeaker systems based on CMD - Coverage Matched Design technology, designed to guarantee a smooth transition between high frequency horns and low frequency transducers directivity. Featuring several mounting points and handles it simplifies permanent install applications.

TWO-WAY PASSIVE SPEAKER
  • 1.4" compression driver with 2,5" diaphragm assembly
  • 15" woofer with 3" voice coil
  • 90° x 90° CMD (Coverage Matching Design) constant directivity horn
  • HF driver AMCDP (Active Mosfet Compression Driver Protection)
TWO-WAY PASSIVE SPEAKER
  • 1.4" compression driver with 2,5" diaphragm assembly
  • 15" woofer with 3" voice coil
  • 90° x 60° CMD (Coverage Matching Design) constant directivity horn
  • HF driver AMCDP (Active Mosfet Compression Driver Protection)
TWO-WAY PASSIVE SPEAKER
  • 1.4" compression driver with 2,5" diaphragm assembly
  • 15" woofer with 3" voice coil
  • 90° x 40° CMD (Coverage Matching Design) constant directivity horn
  • HF driver AMCDP (Active Mosfet Compression Driver Protection)
TWO-WAY PASSIVE SPEAKER
  • 1.4" compression driver with 2,5" diaphragm assembly
  • 15" woofer with 3" voice coil
  • 90° x 60° CMD (Coverage Matching Design) constant directivity horn
  • HF driver AMCDP (Active Mosfet Compression Driver Protection)
TWO-WAY PASSIVE SPEAKER
  • 1.4" compression driver with 2,5" diaphragm assembly
  • 15" woofer with 3" voice coil
  • 60° x 40° CMD (Coverage Matching Design) constant directivity horn
  • HF driver AMCDP (Active Mosfet Compression Driver Protection)
TWO-WAY PASSIVE SPEAKER
  • 1.4" compression driver with 2.5" diaphragm assembly
  • 12" woofer with 3" voice coil
  • 90° x 90° CMD (Coverage Matching Design) constant directivity horn
  • HF driver AMCDP (Active Mosfet Compression Driver Protection)
TWO-WAY PASSIVE SPEAKER
  • 1.4" compression driver with 2.5" diaphragm assembly
  • 12" woofer with 3" voice coil
  • 90° x 60° CMD (Coverage Matching Design) constant directivity horn
  • HF driver AMCDP (Active Mosfet Compression Driver Protection)
TWO-WAY PASSIVE SPEAKER
  • 1.4" compression driver with 2.5" diaphragm assembly
  • 12" woofer with 3" voice coil
  • 90° x 40° CMD (Coverage Matching Design) constant directivity horn
  • HF driver AMCDP (Active Mosfet Compression Driver Protection)
TWO-WAY PASSIVE SPEAKER
  • 1.4" compression driver with 2,5" diaphragm assembly
  • 15" woofer with 3" voice coil
  • 60° x 60° CMD (Coverage Matching Design) constant directivity horn
  • HF driver AMCDP (Active Mosfet Compression Driver Protection)
TWO-WAY PASSIVE SPEAKER
  • 1.4" compression driver with 2.5" diaphragm assembly
  • 12" woofer with 3" voice coil
  • 60° x 40° CMD (Coverage Matching Design) constant directivity horn
  • HF driver AMCDP (Active Mosfet Compression Driver Protection)
TWO-WAY PASSIVE SPEAKER
  • 120° x 60° CMD (Coverage Matching Design) constant directivity horn
  • Rotatable Horn System for horizontal cabinet mounting applications
  • HF driver AMCDP (Active Mosfet Compression Driver Protection)
  • LICC (Low Impedance Compensated Crossover) network
TWO-WAY PASSIVE SPEAKER
  • 90° x 60° CMD (Coverage Matching Design) constant directivity horn
  • Rotatable Horn System for horizontal cabinet mounting applications
  • HF driver AMCDP (Active Mosfet Compression Driver Protection)
  • LICC (Low Impedance Compensated Crossover) network
TWO-WAY PASSIVE SPEAKER
  • 120°x 60° CMD (Constant Matching Design) constant directivity horn
  • Rotatable Horn System for horizontal cabinet mounting applications
  • HF driver AMCDP (Active Mosfet Compression Driver Protection)
  • LICC (Low Impedance Compensated Crossover) network
TWO-WAY PASSIVE SPEAKER
  • 90°x 60° CMD (Constant Matching Design) constant directivity horn
  • Rotatable Horn System for horizontal cabinet mounting applications
  • HF driver AMCDP (Active Mosfet Compression Driver Protection)
  • LICC (Low Impedance Compensated Crossover) network

MEDIA SERIES

Simple and elegant. Neutral design which is perfectly suited to every environment. A complete portfolio of speakers for Installed Sound.
RCF Media Series features high-quality materials and transducers in a compact and linear design with a fully comprehensive compound of install accessories.

TWO-WAY PASSIVE SPEAKER
  • 300W AES power handling
  • 1 x 12\" woofer, vented
  • 1 x 1\" in driver, on 90°x60° CD horn
  • Steel Front Grille with robust double mesh polyester clothing
TWO-WAY PASSIVE SPEAKER
  • 300W AES power handling
  • 1 x 10\" woofer, vented
  • 1 x 1\" driver, on 90°x60° CD horn
  • Steel Front Grille with robust double mesh polyester clothing
TWO-WAY PASSIVE SPEAKER
  • 150W AES power handling
  • 1 x 8" woofer, vented
  • 1 x 1" in driver, on 90°x60° CD horn
  • Steel Front Grille with robust double mesh polyester clothing
TWO-WAY PASSIVE SPEAKER
  • 100W AES power handling
  • 1 x 6.5" woofer, vented
  • 1 x 1" in driver, on 90°x90° CD horn
  • Steel Front Grille with robust double mesh polyester clothing
TWO-WAY PASSIVE SPEAKER
  • 120W AES power handling
  • 2 x 6.5" woofer, vented
  • 1 x 1" in driver, on 90°x90° CD horn
  • Steel Front Grille with robust double mesh polyester clothing
TWO-WAY PASSIVE SPEAKER
  • 100W AES power handling
  • 2 x 5.5" woofer, vented
  • 1 x 1" in driver, on 90°x90° CD horn
  • Steel Front Grille with robust double mesh polyester clothing
TWO-WAY PASSIVE SPEAKER
  • 80W AES power handling
  • 1 x 5.5" woofer, vented
  • 1 x 1" in driver, on 90°x90° CD horn
  • Steel Front Grille with robust double mesh polyester clothing
BASS REFLEX SUBWOOFER
  • System Power rating 300 Watt RMS
  • 12" high-efficiency 2.5" voice-coil woofer
  • 127 dB maximum sound pressure level
  • M20 standard pole mount in top section of cabinet

L SERIES

High-quality column speakers for installation in auditoriums, congress centres or houses of worship. Perfect intelligibility is ensured by state of the art transducer components and a careful acoustic design.
The L Series is the optimum choice for a variety of fixed applications where the critical acoustical environment or architectural constraints require control of the vertical acoustic dispersion.

THREE WAY SPEAKER COLUMN ARRAY
  • Six 5" woofers and four 1" dome tweeters
  • LICC (Low Impedance Compensated Crossover)
  • 200W at 8 Ohm; 60W line transformer included
  • Controlled dispersion

P SERIES

Highly efficient coaxial designs offering excellent music and speech intelligibility in a compact, lightweight, and weatherproof enclosure. The advanced tough design of the P Series allows aesthetic architectural compatibility and robustness in every environment, outdoor or indoor.
The heavy-duty cabinets feature an extremely light weight 'Rotomoulded' UV stabilised plastic resin.

WEATHERPROOF COAXIAL TWO WAY SPEAKER
  • One 15" high-output LF transducer with 3" voice coil
  • One RCF Precision 1.3" C. Driver with 2.5" voice coil
  • Active Mosfet Compression Driver Protection
  • 12 brass suspension points (M10)
WEATHERPROOF COAXIAL TWO WAY SPEAKER
  • 15" high-output LF transducer with 2.5" voice coil
  • RCF Precision 1" Compression Driver with 1.5" voice coil
  • Active Mosfet Compression Driver Protection
  • 12 brass suspension points (M10)
WEATHERPROOF COAXIAL TWO WAY SPEAKER
  • One 10" high-output LF transducer with 2" voice coil
  • One RCF Precision 1" Compression Driver with 1.5" voice coil
  • Active Mosfet Compression Driver Protection
  • LICC (Low Impedance Compensated Crossover) network
OUTDOOR/INDOOR SUBWOOFER
  • 800 W AES
  • 15" high power neodymium wooofer with 4" voice coil
  • Arrayable bass-reflex compact subwoofer
  • 132 dB max SPL
OUTDOOR/INDOOR TWO WAY SPEAKER SYSTEM
  • 500 W RMS
  • Two 8\" high-output LF transducers with 2.5\" voice coil
  • One RCF Precision neodymium 1\" compression driver with 1.75\" diaphragm assembly
  • LICC (Low Impedance Compensated Crossover) network
WEATHERPROOF TWO WAY LOUDSPEAKER
  • Two 8" high-output LF transducer with 2.5" voice coil
  • One RCF Precision 1.4" Neo Compression Driver with 2.5" voice coil
  • Active Mosfet Compression Driver Protection
  • LICC (Low Impedance Compensated Crossover) network
WEATHERPROOF TWO WAY LOUDSPEAKER
  • One 8" high-output LF transducer with 2.5" voice coil
  • One RCF Precision 1" Compression Driver with 1:5" voice coil
  • Imput connector 4 pole Amphenol IP 67
  • Active Mosfet Compression Driver Protection
OUTDOOR/INDOOR TWO WAY SPEAKER SYSTEM
  • 100 W RMS
  • One 8" high-output LF transducer with 1.5" voice coil
  • One RCF Precision 1" Compression Driver with 1.5" voice coil
  • LICC (Low Impedance Compensated Crossover) network

SUB SERIES

The RCF ACUSTICA SUBWOOFER Series is a highly advanced line up of compact subwoofers, offering dedicated models in various configurations (bass reflex, bandpass and horn loaded), specially designed for permanent installation applications.
BASS REFLEX SUBWOOFER
  • 2 x 18" high-efficiency 4.0" voice-coil woofer with Inside/Outside Coil Technology
  • System Power rating 3000 Watt RMS
  • 141 dB maximum sound pressure level
  • M20 standard pole mount in top section of cabinet
HIGH-EFFICIENCY SUBWOOFER
  • 18" high-efficiency 4" voice-coil woofer with Inside/Outside Coil Technology
  • 137 dB maximum sound pressure level
  • Response down to 30 Hz
  • 35 mm standard pole mount in top section of cabinet
HIGH-EFFICIENCY SUBWOOFER
  • 15" high-efficiency RCF Precision 4" voice-coil woofer with Inside/Outside Coil Technology
  • 133 dB maximum sound pressure level
  • Response down to 35 Hz
  • 35 mm standard pole mount in top section of cabinet
BANDPASS SUBWOOFER
  • 15" high-efficiency RCF Precision 4" voice-coil woofer with Inside/Outside Coil Technology
  • Bandpass woofer
  • 135 dB Max SPL
  • Response down to 43 Hz
BASS REFLEX SUBWOOFER
  • System Power rating 300 Watt RMS
  • 12" high-efficiency 2.5" voice-coil woofer
  • 127 dB maximum sound pressure level
  • M20 standard pole mount in top section of cabinet
BANDPASS SUB WOOFER
  • 12" high-efficiency RCF Precision 3" voice-coil woofer with Inside/Outside Coil Technology
  • 124 dB maximum sound pressure level
  • Response down to 45 Hz
  • 35 mm standard pole mount in top section of cabinet

MONITOR SERIES

RCF Monitor Series is a range of speakers designed to deliver uncompromised audio performance and rugged reliability in fixed installations. All Monitor models have been designed to blend with any décor and deliver deep bass, smooth midrange and finely-detailed high-frequency response. Quality components and careful acoustic design make the Monitor Series the perfect speakers for critical listening in the most demanding applications.
2 WAY REFLEX SPEAKER HIGH DEFINITION
  • Transducers LF 5" - HF 0.75" constant directivity tweeter
  • bass reflex tuned at 65Hz
  • Built-in low inductance passive crossover with high frequency dynamic protection
  • Body in self-extinguishing plastic
2 WAY REFLEX SPEAKERS 60 W WITH TRANSFORMER
  • Ideal for high quality paging and music reproduction
  • Low impedance (4Ω - 60W) or 100V operating mode
  • Transducers LF 5\" - HF 0.5\" constant directivity tweeter
  • Built-in low inductance passive crossover with high frequency dynamic protection, bass refl ex @65Hz
2 WAYS REFLEX SPEAKER 40 W WITH TRANSFORMER
  • Low impedance (4Ω - 40W) or 100V operating mode
  • 0.5\" tweeter in Mylar on constant directivity horn
  • Built-in low inductance passive crossover, bass reflex @150Hz
  • Woofer with carbon fiber cone

MONITOR Q SERIES

The MonitorQ Series is a range of speakers that offers advanced industrial design and acoustic engineering to provide the Sound Contractor with a new palette of fashionable and compact installation speaker systems.
3 WAY COLUMN LOUDSPEAKER
  • 2 rubber surround 3.5" woofers
  • 2 fabric surround 3.5" mid-woofers
  • 40 / 80 Watt (RMS/Music Power)
  • 118 dB (80 W/1 m) max. SPL
2 WAY INDOOR OUTDOOR SPEAKER
  • Speaker: woofer 5" horn-loaded, 1" horn-loaded compression driver with phase-plug loaded on CD horn
  • Power/RMS: 120/60 W Bypass
  • Crossover frequency: 3000 Hz Crossover: Notch/6 dB/oct
  • [70,7V]: 15W - 10W - 5W - 2,5W
2 WAY WALL MOUNT SPEAKER
  • Speaker composed by 5" woofer 5" and 2 x 1" dome tweeter
  • Max output power 120 W
  • Bypass configuration input 16 Ω, output power 60 W RMS
  • Dynamic Protection on woofer and tweeter
2 WAY IN WALL SPEAKER
  • Speaker: woofer 5" neodymium magnet tweeter 0.75" dome tweeter
  • Power: max. 60W (bypass)
  • [70,7V]: 15W - 10W - 5W - 2.5 W
  • Crossover frequency: 3000 Hz, 12/12 dB/oct
2 WAY CEILING SPEAKER
  • Two way bass refl ex ceiling speaker for music reproduction
  • Speaker: woofer 5" neodymium magnet tweeter 1" dome neodymium magnet
  • Power/RMS: 120/60W Bypass
  • [70,7V]: 15W - 10W - 5W - 2.5 W
2 WAY COMPACT SPEAKER
  • Two way Bass refl ex speaker for music reproduction
  • Speaker: woofer 5" - tweeter 0,75" dome
  • Power/RMS: 120/60 W Bypass
  • Crossover frequencies: 4500 Hz, 12/12 dB/oct
2 WAY MINIATURE SPEAKER
  • Two way coaxial speaker: LF 3,5" - tweeter 0,75" dome
  • Power/RMS: 24/12 W Bypass
  • Built-in High-Pass fi lter at 150 Hz for integration with a subwoofer
  • Cabinet: Hi-density polystyrene HB grade
COMPACT SUBWOOFER
  • SubWoofer 8", expecially designed to be used with MonitorQ series speakers
  • Power/RMS: 160/80W Bypass
  • [100V]: 60W - 30W - 15W - 7.5W - [70,7V]: 30W - 15W - 7.5W - 3.75 W
  • Crossover frequency: 200 Hz, 12 dB/oct

ART 3 SERIES

The optimum choice for high powered vocal applications, music playback and demanding musicians.
ART 3 is a brand-new classic: a re-engineered loudspeaker that preserves the original concept, which dates back to 1996,
with cutting edge technology. Power and high quality in a convenient package.

PASSIVE TWO-WAY SPEAKER
  • 300 Watt power handling
  • 15" woofer, high power 2.5" voice coil
  • 1" HF neo driver, 1.5" v.c.
  • 128 dB max spl
PASSIVE TWO-WAY SPEAKER
  • 300 Watt power handling
  • 127 dB max spl
  • 90 x 60, Wide dispersion constant directivity horn
  • 12" woofer, high power 2.5" voice coil
PASSIVE TWO-WAY SPEAKER
  • 300 Watt power handling
  • 127 dB max spl
  • 90 x 70, Wide dispersion constant directivity horn
  • 10\" woofer, high power 2,5\" voice coil

ELECTRONICS

A complete range of powerful, robust, musical, and clean electronic devices for any live sound or install use. The amplifier range is the best companion for the entire passive range of RCF speakers, offering high power and low distortion when a separate amplifier/loudspeaker system is required. The electronics (DSPs, Matrix, etc...) follows the RCF high quality design for a reliable use, stand-alone or on a RDNet network.
8 OUTPUT MASTER UNIT
  • Bridging the control and monitoring network in between Ethernet (remote control) / USB (direct control) and RDNet
  • Connecting PC to Control 8 and controlling up to 8 subnet of up to 32 slaves devices
  • Configuring the net with bus connection or ring connection
  • Auto detect net configuration and registration
4 CHANNELS CLASS D POWER AMPLIFIER WITH CROSSOVER
  • Fast response and low distortion
  • Eight different operation modes, two of which with internal crossover
  • Extensive protective circuits ensure high reliability and operating safety
  • Level control for each channel on the front panel
2 OUTPUT MASTER UNIT
  • Real-time acquisition of devices functioning information
  • Devices automatic addressing handling
  • 32 compatible devices linkable in "daisy-chain" for each of the 2 available RDNET ports
  • All devices listed and cyclically scanned ("polling"). 10 times a second, each device checked in a single daisy-chain
AUDIO MATRIX
  • 40-bit floating point processing DSP and 48 kHz 24-bit HI-Q Analogue/Digital Conversion, dynamic range > 112 dB.
  • 8 universal inputs (48V), 6 outputs - 4 Euroblocks bal., 2 RCA plugs
  • 10 programmable logic inputs (GPI), 6 programmable logic outputs (GPO), 2 of which supported by relay.
  • Extended range of processing options
MATRIX AUDIO PROCESSOR
  • Hybrid architecture DSP
  • 48 KHz sampling, 40 bit floating point engine
  • 16 x 16 I/O matrix
  • Dante enabled network audio transport
4 INPUTS, 8 OUTPUT DIGITAL PROCESSOR
  • The DX 4008 is a complete 4 input - 8 output digital loudspeaker management system designed for the touring or fixed sound installation markets
  • Sampling rate can be set to 96kHz
  • Precise frequency control is achieved with its 1 Hz resolution
  • Inputs and outputs can be routed in multiple configuration to meet any requirements
HIGH POWER AMPLIFIER
  • Fast response and low distortion
  • Easy to configure in stereo / mono / bridge modes
  • Extensive protective circuits ensure high reliability and operating safety
  • Front panel signal / clippings / protection/ temperature LEDs indicators
CLASS H PROFESSIONAL POWER AMPLIFIER
  • Fast response and low distortion
  • Easy to configure in stereo / mono / bridge modes
  • Extensive protective circuits ensure high reliability and operating safety
  • Front panel signal / clip / protect LED indicators
CLASS H PROFESSIONAL POWER AMPLIFIER
  • Fast response and low distortion
  • Easy to configure in stereo / mono / bridge modes
  • Extensive protective circuits ensure high reliability and operating safety
  • Front panel signal / clip / protect LED indicators
2 X 1500 W CLASS H PROFESSIONAL POWER AMPLIFIER
  • 2 unit 19" rack, easy transportation
  • Fast response and low distortion
  • Easy to configure in stereo / mono / bridge modes
  • Extensive protective circuits ensure high reliability and operating safety
2 X 1100 W CLASS H PROFESSIONAL POWER AMPLIFIER
  • 2 unit 19" rack, easy transportation
  • Fast response and low distortion
  • Easy to configure in stereo / mono / bridge modes
  • Extensive protective circuits ensure high reliability and operating safety.
2 X 450 W CLASS H PROFESSIONAL POWER AMPLIFIER
  • 2 unit 19" rack, easy transportation
  • Fast response and low distortions
  • Easy to configure in stereo / mono / bridge modes
  • Extensive protective circuits ensure high reliability and operating safety.
2 X 300 W CLASS AB PROFESSIONAL POWER AMPLIFIER
  • 2 unit 19" rack, easy transportation
  • Fast response and low distortion
  • Easy to configure in stereo / mono / bridge modes
  • Extensive protective circuits ensure high reliability and operating safety.
CD / MP3 PLAYER, FM TUNER
  • Double sound source with two indipendent sections and outputs (Tuner - CD/MP3)
  • CD player insert to reproduce audio tracks and MP3 files from a compact disc (CD, CD-R, CD-R/W)
  • MP3 player from the USB drive or SD-Card drive ("Flash" memory-stick)
  • The USB port is available on both the front and back panels to provide maximum flexibility

RCF AMBIENTE

Elegant and slim-line devices for multiple zone distribution of signals in residential and commercial environments. The flexibility and simplicity of RCF Ambiente makes it the perfect solution where the distribution of background and foreground music, along with a paging system, is desired.
It is extremely easy to install being composed of a master control unit and simple remote-control panels to manage volume in different rooms.
MULTI-ZONE MUSIC AND PAGING SYSTEM
  • 3 Music Source Inputs individually selectable to each output
  • One Input Source with Override facility (Jukebox or Auto Announcer)
  • 5 zoned outputs (Mono) or 1 Stereo and 3 Mono Output Zones
  • Can be expanded interlink of two or more MS520 units

ATTENUATORS AND TRANSFORMERS

High-quality transformers suitable for connecting 4-8 Ω impedance loudspeakers to constant voltage lines (70-100V). Multiple power values are available for customisable systems. In particular, dynamics and frequency response are extended thanks to material over-sizing and alternate layer windings. They are perfectly suitable to drive professional speakers through constant voltage power amplifiers.
240 W UNIVERSAL LINE TRANSFORMER
  • High quality transformers suitable to connect loudspeakers with 4-8 Ω impedance (TD 105 excluded) to constant voltage lines (70-100V)
  • Thanks to material over-sizing and alternate layer windings, they offer high performance: dynamics and frequency response are particularly extended.
  • It's possible to select different power values choosing different outputs
  • They are suitable to drive professional speakers through constant voltage power amplifiers (TD 105 excluded)
120 W UNIVERSAL LINE TRANSFORMER
  • High quality transformers suitable to connect loudspeakers with 4-8 Ω impedance (TD 105 excluded) to constant voltage lines (70-100V).
  • Thanks to material over-sizing and alternate layer windings, they offer high performance: dynamics and frequency response are particularly extended.
  • It's possible to select different power values choosing different outputs
  • They are suitable to drive professional speakers through constant voltage power amplifiers (TD 105 excluded)
60 W UNIVERSAL LINE TRANSFORMER
  • High quality transformers suitable to connect loudspeakers with 4-8 Ω impedance (TD 105 excluded) to constant voltage lines (70-100V)
  • Thanks to material over-sizing and alternate layer windings, they offer high performance: dynamics and frequency response are particularly extended
  • It's possible to select different power values choosing different outputs
  • They are suitable to drive professional speakers through constant voltage power amplifiers (TD 105 excluded)
30 W UNIVERSAL LINE TRANSFORMER
  • High quality transformers suitable to connect loudspeakers with 4-8 Ω impedance (TD 105 excluded) to constant voltage lines (70-100V)
  • Thanks to material over-sizing and alternate layer windings, they offer high performance: dynamics and frequency response are particularly extended
  • It's possible to select different power values choosing different outputs
  • They are suitable to drive professional speakers through constant voltage power amplifiers (TD 105 excluded)
10 W UNIVERSAL LINE TRANSFORMER
  • High quality transformers suitable to connect loudspeakers with 4-8 Ω impedance (TD 105 excluded) to constant voltage lines (70-100V)
  • Thanks to material over-sizing and alternate layer windings, they offer high performance: dynamics and frequency response are particularly extended
  • It's possible to select different power values choosing different outputs
  • They are suitable to drive professional speakers through constant voltage power amplifiers (TD 105 excluded)
.