Merkmale
  • 3.5 - inch Inside / Outside copper voice coli
  • 900 Watt continuous program power LF
  • 101 dB Sensitivity
  • 40 Hz - 3 kHz Frequency range
  • Dual - forced air ventilation for minimum power compression
  • Dual spider design with silicon based damping control
  • 2.5 - inc Diaphragm, 1.4 - inch Exit Throat / Pure Titanium Compression Driver
  • 180 Wat Continuos program power HF
  • Frequency range: 700 Hz - 20 kHz
  • Direct Drive Voice Coil Assembly

This CX15N351 is designed to provide an excellent frequency response linearity with very low distortion. This coaxial use a strongest unique neodymium magnetic structure that guarantee high dynamic and sensitivity for both components. The mid-bass section use a 3,5” voice coil design provides a very high power handling, especially recommended in comparison to a standard 3" voice coil, demodulation ring get a fastest time response and lower distortion . The compression driver use a 2.5-inch diaphragm with a 1.4 inch throat featuring several state of the art technologies. The diaphragm and suspension are formed from 0.05mm thick pure titanium. The unique magnetic structure allow to get a single point source that providing coherent wave front.

Part number:

11100032
CX15N351
8ohm

Spezifikationen
Allgemeine spezifikationen
Nominal Durchmesser
15 inch / 381 mm
Zugehörige Impedanz (Ohm)
8.00 ohm
Programm Power (Watt)
900 W
Belastbarkeit
450 W
Empfindlichkeit (dB)
101.0 dB
Frequenzbereich
40 - 3000 Hz
Nenndurchmesser Membran
330 mm / 12.99 inch
Maximale Auslenkung vor Schaden
39 mm / 1.54 inch
Minimale-Impedanz (Ohm)
6.8 ohm
Schwingspulendurchmesser
3.5 inch / 89 mm
Spulenlänge
0.67 inch / 17 mm
Art von Schichten
inside/outside
Obere Polplattenstärke
11 mm / 0.43 inch
Konusdesign
Curved
Surround Design
M-roll
Doppelbelüftung (Innen/Aussen)
Yes
Thiele - small parameters
Resonanzfrequenz (Fs) (Hz)
55 Hz
Gleichstromwiderstand (Re) (Ohm)
5.60 ohm
Mechanische Güte (Qms)
6.00 Qms
Elektrische Güte (Qes)
0.27 Qes
Gesamt Q-Faktor (Qts)
0.26 Qts
Kraftfaktor (BL-Factor) (T x m)
23.50 T x m
effektiv bewegte Masse (Mms)(g)
80.0 g
Äquivalentes Luftnachgiebigkeitsvolumen (Vas) (Liter)
110.0 liters
effektive Membranfläche (Sd) (m2)
0.090 m2
Maximale lineare Auslenkung (Xmax) (mm)
6 mm
Schwingspuleninduktivität L @ 1kHz (Le1k) (mH)
1.65 mH
Halbraum-Wirkungsgrad r=1m (eff) (%)
6.53%
Spezifikationen (Treiber)
Austrittsöffnung Halsdurchmesser: (mm) (Zoll)
1.4 inch / 36 mm
Zugehörige Impedanz (Ohm)
8.00 ohm
Programm Power (Watt)
180 W
Belastbarkeit (Watt)
90 W
Empfindlichkeit (dB)
110 dB
Frequenzbereich
700 - 20000 Hz
Aufhängungskonstruktion
Progressive
Minimale-Impedanz (Ohm)
7.90 ohm
Schwingspulendurchmesser
2.5 inch / 63 mm
Layeranzahl
1.00
Art von Schichten
outside
Magnetische Flussdichte (T)
2.0 T
Phase Plug Design
3 slot
Spezifikationen (Horn)
Horn Anschlussöffnung
36 mm / 1.4 inch
Horizontaler Abstrahlwinkel:
60°
Vertikaler Abstrahlwinkel:
60°
Grenzfrequenz (Hz)
800 Hz
Montagehinweise
Gesamtdurchmesser
393 mm / 15.47 inches
Lochkreis Durchmesser
371-376 mm / 14.61-14.8 inch
Lochdurchmesser
7 mm / 0.28 inch
Ausschnittsgröße bei frontaler Montage
354 mm / 13.94 inch
Schallwandöffnung für rückseitige Montage
354 mm / 13.94 inch
Vom Treiber verdrängtes Volumen (bei frontaler Montage)
3.8 liters / 0.15 ft3
Standardkonformität
Safety agency
CE compliant
Größe
Höhe
254 mm / 10 inches
Durchmesser
393 mm / 15.47 inches
Gewicht
7 kg / 15.43 lbs
Versandinformationen
Verpackung Höhe
240 mm / 9.45 inches
Verpackung Breite
440 mm / 17.32 inches
Verpackung Tiefe
440 mm / 17.32 inches
Verpackungsgewicht
8.5 kg / 18.74 lbs
Downloads
DATENBLÄTTER
PDF
696 KB
22-01-2024
ZEICHNUNGEN
PDF
694 KB
20-03-2018
DWG
229 KB
22-01-2024