RDNet SOFTWARE
NETWORKED CONTROL AND MUCH MORE
  • Array and Zones Grouping with multiple-type EQ, Bass Shaper and FiRPHASE EQ
  • Auto Scan and complete monitoring
  • Shape Designer Array Calculator with Subwoofer configuration helper
  • Adjust hi-pass, EQ, gain and delay on individual components
  • Array and Zones Grouping with multiple-type EQ, Bass Shaper and FiRPHASE EQ
  • Auto Scan and complete monitoring
  • Shape Designer Array Calculator with Subwoofer configuration helper
  • Adjust hi-pass, EQ, gain and delay on individual components
  • Complete Real Time Monitoring
  • Automatic Cluster Size shaping and Air Compensation
RDNet is a robust management network and control platform for small, medium and large arena-sized sound systems, as well as complex and extended installations. Based on a proprietary network protocol, the software provides intuitive control and monitoring of every connected device/object in the RCF audio system.

 

THE TOOLBOX FOR SOUND SYSTEM DESIGN

The RDNet Scan function sequentially scans all audio devices, recognizes, assigns digital address labels, and adds devices as objects on the main window. The real-time monitoring features a multitude of parameters such as fan speed, temperature, the inclination of a single speaker, VU Meters, peak levels, and more. The operator has complete control of time delay and equalization of every speaker, individually or grouped. With its built-in DSP, each device is an active part of the system, able to store presets, receive commands, and continuously send status information. Comprehensive monitoring is standard in RDNet: VU metering, clip indicator, limiter intervention, device inclination, communication issues—down to the status of a single component or a transducer—and much more.

 


 

TAKE ALL APPROPRIATE MEASURES

RDNet Measure is a powerful 4-input Dual-Channel FFT Audio Analyzer able to measure Magnitude, Phase, RTA, Coherence, and Impulse response. Functions included spans from a delay finder, a multiple signal generator, and an integrated SPL meter/logger with calibration tools. There's no need for external software to get the job done.

Discover RDNet measures


 

 

GET THE MOST OUT OF YOUR SYSTEM

RDNet gives the ability to control devices in Groups for easy supervision. Arrays customizable Group properties are Zones, Air Compensation, Cluster Size, FiRPHASE Gain. When assigning Group Array objects in Zones: every Zone has its color for quick reference of set parameters. An incremental control shapes the Air Absorption Compensation, which can be very useful with changes in humidity or temperature (e.g., soundcheck on a sunny day, concert on a humid night). The line array’s low-mid shaping is automatically calculated on the Cluster size to obtain the perfect linear frequency response from the entire system.


 

 

ADVANCED EQUALIZERS

RDNet takes direct control of the internal EQ and High-Pass filter on each cabinet. There are many EQ types to choose from: PEQ, Shelving (hi-low), Butterworth, Linkwitz-Riley and Bessel. The system engineer can manage EQs in two different modes for fast editing on touchscreens. Every Zone has three different fixed equalizers with gain control, while each Array Group has global control of the FiRPHASE Gain for parallel increment/decrement of the Zone FIRs.

 


 

 

STRAIGHT-FORWARD SOUND DESIGN

Shape Designer prediction software enables a two-dimensional acoustic simulation of the array configuration and suggest LF Corrections based on the cluster size. The system curvature angles and sound projection data are computed with maximum sound pressure levels for the given design. The software provides system curvature and weight, system rigging points, and cabinet angles.


 

SET-UP ASSISTANT

The System Designer chooses the best way to configure the system: Offline for the remote designer, or Online for selecting Soundcheck or Concert modes, for a safer system control during the show. Guided subwoofer configurations help the engineer to set up subwoofer Cardioids, Arcs, or EndFire configurations in one pass.

The advanced Bass Shaper function fine-tunes the desired timbre on low frequencies to better match the spectrum overlap with subwoofers. Within a few easy steps, Bass Shaper corrects low-end behavior while maintaining tonal balance across the entire system.


 

 

 

 

NETWORKED SPEAKER CONTROL

When the RCF sound system is connected via Control2 or Control8 interfaces, the system engineer has complete control of time delay and equalization of all speakers, individually or grouped. With its built-in communication board and DSP, each device is an active part of the system, able to store presets, receive commands, and continuously send status information of single components or transducers. Comprehensive monitoring is standard in RDNet: VU metering, clip indicator, limiter intervention, device inclination, communication issues, and much more.

Read More

 

Read More

 


 

EASY SUBWOOFER CONFIGURATION

Guided subwoofer configurations help the engineer to set up subwoofer Cardioids, Arcs, or EndFire configurations in one pass, while the Bass Shaper fine-tunes the desired timbre on low frequencies. With three sliders and a few steps, it’s easy to correct low-end behavior while maintaining tonal balance across the entire system.

 

 

Subwoofer_configuration


 

TRAVEL LIGHT ON CLOUDS

You don't need your personal computer anymore. Just connect your computer to the web, sign-in to your account, and you are ready to go with a complete set of audio tools for your RCF audio system. You can also save your projects and measurements and recall them anywhere you are.


 

 

 

 

LIVE SOUND AND INSTALL AUDIO APPLICATIONS

RDNet is the RCF platform for the management of both live and installed systems. One single network to control, route, and tune all RCF compatible devices, including the latest additions such as the DMA matrix amplifiers, VSA column arrays, and the new HD, HDL, and TT+ speakers.

 

 

 

 

 

 

HOW TO USE RDNet

Discover our tutorials to learn how to use RDNet.

 

 

 

shaper

 

 

FiRPHASE on TT+ and HDL series

Please download the latest RDNet software release and follow the upgrade procedure to enhance speaker processing capabilities with FiRPHASE.

 

The Firmware Upgrade is simple and automated:

• connect the device to RDNet 

• the system immediately checks the Firmware version and upgrades it if needed.

Please note: the sound of the upgraded system will change significantly. The upgraded modules will not be compatible with the older units.

Read More


 

DOWNLOAD THE SOFTWARE

The RDNet software is freely available for registered users on RCF’s website Download Section

 

* Windows compatible device

 

Download RDNet 4.0

Specifications
General specifications
Operating system:
Windows Vista, Windows 7, Windows 10
.